Core Chip Solution
1. CAN/FlexRay Transceiver
| Manufacturer | Part Number | Description | Supply Voltage | Speed | Operate Temp | Package | ESD |
| Atmel | ATA6660 | High Speed CAN Transceiver | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | SOIC8 | 8KV |
| Freescale | MC33742 | System Basis Chip with Enhanced High Speed CAN (250K to 1Mbps) | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | QFN-48/SOIC-28 | NO |
| Freescale | MC33989 | System Basis Chip with High-Speed CAN Transceiver | 5.5V to 18V | 1Mbps | -40°C to +125°C | SOIC28 | NO |
| Infineon | TLE 6251G | High Speed CAN Transceiver | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | SOIC8 | 6KV |
| Infineon | TLE 6254-3G | CAN Transceiver | 4.75V to 5.25V | 125Kbps | -40°C to +125°C | PG-DSO-14 | NO |
| Microchip | MCP2551-I/SN | High Speed CAN Transceiver | 4.5V to 5.5V | 1Mbps | -40°C to +125°C | SOIC8 | NO |
| NXP | PCA82C251T/N3 | High Speed CAN Transceiver | 4.5V to 5.5V | 1Mbps | -40°C to +125°C | SOIC8 | NO |
| NXP | TJA1040T/N1 | High Speed CAN Transceiver | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | SOIC8 | 6KV |
| NXP | TJA1041 | High Speed CAN Transceiver | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | SOIC8 | 6KV |
| NXP | TJA1082 | FlexRay Transceiver | 4.75V to 5.25V | 10Mbps | -40°C to +125°C | SSOP16 | 8KV |
| Onsemi | AMIS-30660NGA | CAN High Speed (Pure Sn) | -0.3V to 7V | 1Mbps | -40°C to +125°C | SOIC8 | NO |
| ST | L9616 | High Speed CAN Transceiver | -0.3V to 7V | 1Mbps | -40°C to +125°C | SOIC8 | 4KV |
| TI | SN65HVD251D | High Speed CAN Transceiver | 4.5V to 5.5V | 1Mbps | -40°C to +125°C | SOIC8 | 14KV |
| TI | SN65HVD233DG4 | High Speed CAN Transceiver | 3V to 3.6V | 1Mbps | -40°C to +125°C | SOIC8 | 16KV |
| Vishay Siliconix | Si9200EY | CAN Transceiver IC | 4.75V to 5.25V | 1Mbps | -40°C to +125°C | SOIC8 | NO |
2. Voltage Regulator
3. 3-Phase Motor Driver
| Manufacturer | Part Number | Description | Package | Supply Voltage | Operate Temp |
| Allegromicro | A3930KJP-T | Motor Driver 3 Phase BLDC | LQFP-48 | 5.5V to 50V | -40°C to +125°C |
| Allegromicro | A3931KJP-T | Motor Driver 3 Phase BLDC | LQFP-48 | 5.5V to 50V | -40°C to +125°C |
| Allegromicro | A3935KLQTR | 3-Phase Power MOSFET Controller for Automotive Applications | QSOP36 | 7V to 40V | -40°C to +135°C |
| Allegromicro | A3946KLB-T | Half-Bridge Power MOSFET Controller | TSSOP16 | 7V to 60V | -40°C to +135°C |
| Allegromicro | A3940KLP-T | Full-Bridge Power MOSFET Controller | TSSOP28 | 7V to 40V | -40°C to +135°C |
| Freescale | MC33927 | Three-Phase Field Effect Transistor Pre-Driver | 54 SOICW-EP | 6V to 58V | -40°C to +125°C |
| Infineon | BTS 7810K | DC motor management | P-TO263-15 | up to 40V | -40°C to +150°C |
| Infineon | TLE6217G | Smart Quad Channel Low-Side Switch | PG-DSO-20-37 | 4.8V to 32V | -40°C to +150°C |
| Infineon | BTS 6144B/P | Smart Highside Power Switch | TO 220-7-180 | 5.5V to 38V | -40°C to +150°C |
| Infineon | TLE 6280GP | Three Phase Bridge Driver IC | PG-DSO36 | 8V to 36V | -40°C to +150°C |
| Infineon | TLE 7183F | Three Phase Bridge Driver IC | VQFN-48-14 | 5.5V to 28V | -40°C to +150°C |
| Infineon | TLE 7185E | Three Phase Bridge Driver IC | PG-DSO-36-38 | 5.5V to 32V | -40°C to +150°C |
| Infineon | TLE 7189F | Three Phase Bridge Driver IC | PG-VQFN-48 | 5.5V to 28V | -40°C to +150°C |
| ST | L9349-LF | Quad intelligent power low side switch | PowerSO-20 | 32V | -40°C to +150°C |
| ST | L6235D | Three Phase DC Motor Driver | SO24 | 8V to 52V | -40°C to +150°C |
4. Microcontroller
5. Wheel Speed Sensors
| Manufacturer | Part Number | Description | Operating Freq. | Supply Voltage | Package | Temp. |
| Infineon | TLE4941 | TLE4941 Smart Hall Effect ICs for Active Wheel Speed Sensing 5Khz | 1 to 5KHz | 4.5 to 20V | PG-SSO-2-2 | -40°C to +150°C |
| Infineon | TLE4942 | TLE4942 Smart Hall Effect ICs for Active Wheel Speed Sensing 5Khz | 1 to 5KHz | 4.5 to 20V | PG-SSO-2-2 | -40°C to +150°C |
| NXP | KM15/2 | Integrated rotational speed sensor | 0 to 25KHz | 12V | SOT453A | -40°C to +85°C |
| NXP | KM16/1 | Integrated rotational speed sensor | 0 to 25KHz | 4.5 to 16V | SOT477B | -40°C to +150°C |
| NXP | KM18/2 | Integrated rotational speed sensor | 0 to 25KHz | 4.5 to 16.5V | SOT477A | -40°C to +150°C |
6. Angle and Torque Sensors
| Manufacturer | Part Number | Description | Interface | Supply Voltage | Package | Operate Temp |
| NXP | KMA200 | Programmable angle sensor | SPI | 4.5V to 5.5V | STO637 | –40°C to +160°C |
| NXP | KMZ41 | Magnetic field sensor | 5V | SO8 | –40°C to +150°C | |
| NXP | KMZ43T | Magnetic field sensor | 5V | SO8 | –40°C to +150°C | |
| Infineon | TLE4998C3 | Programmable Linear Hall Sensor | 4.5V to 5.5V | PG-SSO-3-10 | –40°C to +150°C | |
| Infineon | TLE4998C3C | Programmable Linear Hall Sensor | 4.5V to 5.5V | PG-SSO-3-9 | –40°C to +150°C | |
| Infineon | TLE4998C4 | Programmable Linear Hall Sensor | 4.5V to 5.5V | PG-SSO-4-1 | –40°C to +150°C | |
| Infineon | TLE4998P4 | Programmable Linear Hall Sensor | 4.5V to 5.5V | PG-SSO-4-1 | –40°C to +150°C | |
| Infineon | TLE4998S3 | Programmable Linear Hall Sensor | 4.5V to 5.5V | PG-SSO-3-10 | –40°C to +150°C | |
| Infineon | TLE5011 | GMR Angle Sensor | SPI | 4.5V to 5.5V | PG-DSO-8 | –40°C to +150°C |