Gertboard Kit - Add-on GPIO expansion board for the Raspberry Pi

BUY NOWBUY NOWSoftware ToolsTechnical DocumentsVideoFeaturesKit Contents

gertboard.png

The GertboardTM is an add-on board that extends the use of Raspberry Pi to devices in the real world, including motor/lamp control, and the sensing of voltages and currents. It also contains a host micro that can be programmed with code written and compiled for it, on the Raspberry Pi. The GertboardTM Kit contains the bareboard PCB and electronic components that allow you to self assemble your own GertboardTM.

 

 

It comes with a large variety of components, including buttons, LEDs, A/D and D/A converters, a motor controller, and an Atmel AVR microcontroller. There is a suite of test/example programs for the GertboardTM, written in C. , which is freely available from below Design Elements. The GertboardTM Kit is supported by a number of videos featuring Gert van Loo, creator of the GertboardTM and Paul Gibbon from Weller.  These video materials demonstrate how to solder through hole and surface mount components onto the GertboardTM.

 

 

Key Applications: Add-on GPIO expansion board for the Raspberry Pi

More Development Kits and Tools
orangearrw.gifRaspberry Pi - Single Board Computerorangearrw.gifDevelopment Platform and Kits
orangearrw.gifGertboard Kit - Add-on GPIO board for Raspberry Piorangearrw.gifelement14 Knode

 

Technical Documents

 


Learning Center

TypeDescription
User ManualGertboard: User Manual for Gertboard Kit
Assembly ManualGertboard: Assembly Manual for the Gertboard Kit

 

Design Elements

 

TypeDescription
SchematicGertboard: Schematic for Gertboard Kit
Application LibraryGertboard: Application Library for Gertboard Kit (Linux)

 

Back to top

 

Video

 


 

Videos on Gertboard Kit

 

Video 1: Exclusive interview with Gert van Loo, creator of the Gertboard for Raspberry Pi

 

Video 2: Advice on getting ready to assemble your own Gertboard Kit

 

Video 3: Through Hole Soldering Tips on the Gertboard Kit

 

Video 4: Surface Mount Soldering Tips on the Gertboard Kit

 

 

Back to top

 

Kit Features

 


 

gertboard_raspi.png

The major building blocks on GertboardTM are:


  • 12x buffered I/O
  • 3x push button
  • 6x Open collector driver (50V, 0.5A)
  • 48V, 4A motor controller
  • 28-pin dual in line ATmega device
  • 2-channel 8/10/12 bits Digital to Analogue converter
  • 2-channel 10 bits Analogue to Digital converter

 

 

 

 

 

 

 

 

 

 

Back to top

Kit Contents

 


  • Assembled Gertboard

 

Back to top