4 or 8 pin plug and socket cables needed

Grifter,

Thanks for the reply!

Right now I am using Tyco CPC connectors Tyco CPC connectors. My main problem is having to solder wires to each individual pin. And they are not set up for easy access to each pin.

I don't want to even solder a single wire to these, I just want them already assembled.

Any thoughts?

Cabe

Gareth,

Thank you so much. I never knew those cables existed. Keep me updated on you contact with Tyco.

I appreciate it!

Cabe

Engineers are more than just designers, talk about your day to day here in the EDE Life Discourse Group.

Gareth,

What I am using now is the following, I just need something like it:

CONXALL - 4282-8SG-300 - CIRCULAR CONN FEMALE SIZE 20, 8POS PANEL CONXALL - 4282-8SG-300 - CIRCULAR CONN FEMALE SIZE 20, 8POS PANEL

And its mate

CONXALL - Connector; #20; Solder Cup; 8; Pin; 3282-8PG-3DC

On the mate, 3282-8PG-3DC I would need between 12" (inches), but ideally I need 6' (feet).

On the 4282-8SG-300, I only need a 12" lead.

I would take either 4 pin or an 8 pin solution, whcihever is ultimately cheaper.

At the start, my volume would only be about 4 cable assemblies a month. But I will most likely ramp up demand over time.

Thank you for your help, this will help so much.

Cabe