Loading...
An Open-Source platform to create digital devices and interactive objects that sense and control physical devices.
An Open-Source platform to create digital devices and interactive objects that sense and control physical devices.
 |
 |
 |
| VidorScout - MKR Vidor 4000 Mobile Robot | IOT Reflow Oven with Arduino MKR WiFi 1010 | Manage MKR WIFI 1010 Battery Life in the Cloud |
|
VidorScout is an autonomous mobile robot that uses Sensor Fusion which combines camera vision, Time of Flight Sensor data and IR Sensors to identify objects for both avoidance and for object identification. The Arduino MKR Vidor 4000 Development Board is used to take advantage of the on board SAMD Microcontroller and Intel Cyclone 10 FPGA capabilities. |
Soldering Surface Mount Devices (SMD) by hand is doable with large parts but the results are sometimes of lower quality and small parts are difficult. An easy next step is to modify a toaster oven for use as a reflow oven. This project describes how to get started with a basic setup and also adds the ability to monitor actual temperature on adafruit.io and compare it to the desired reflow profile in real time. |
The autonomous sensor device reports battery status to Amazon Web Services. It uses AWS for data insight, graphs and to indicate how long it's expected to continue living without charging. It raises an email alarm at near death. This post shows the AWS modules used to store, report and mail, and how they interact. |
| Re: Arduino PlatformIO Quectel 7 days ago in Arduino | by wizio |
|
|
| Re: Complete beginner requiring help with Bluefruit Feather programming 7 days ago in Arduino |
by Christopher Stanton
|
|
|
| Re: Esp8266 and mySQL 2 weeks ago in Arduino | by neilk |
|
|
| Re: IMAGE PROCESSING USING ARDUINO 2 weeks ago in Arduino |
by clem57
|
|
|
| Re: The Arduino Vidor4000: is there a new IDE? 3 weeks ago in Arduino |
by clem57
|
|
| Subject | Author | ||
|---|---|---|---|
|
Arduino MKR CAN Shield Review - part 2: Interrupt and Filter 4 months ago in Arduino |
by Jan Cumps
|
|
|
|
Arduino MKR CAN Shield Review - part 1: Log BUS Traffic 4 months ago in Arduino |
by Jan Cumps
|
|
|
|
Arduino | 3 New MKR Shields for Your "IoT: In the Cloud" Projects: Arduino MKR RGB, MKR ENV, and MKR THERM! 6 months ago in Arduino |
by tariq.ahmad
|
|
| Subject | Author | ||
|---|---|---|---|
|
|
Arduino Comparison Chart: Boards & Modules 2 years ago in Arduino |
by tariq.ahmad
|
|
by clem57
in
Arduino on Sep 26, 2019
“Has anyone seen/program this https://store.arduino.cc/usa/mkr-vidor-4000 ? I am wondering if this works well as FPGA programming. more...
“The U8g2 library for monochrome LCDs contains nice example with game called: SpaceTrash. Below there is source code of this example: /* more...
“ NS107S LEDs don't any trouble at 24 MHz. According to Paul Stoffregen's Articles on December 6, 2017December 7, 2017, we know the APA102 LEDs strips have the problem at 24 MHz, usually more...
by Jan Cumps
in
Arduino on Jun 26, 2019
“A follow up project with the Arduino MKR CAN Shield. In this post, I try to offload as much effort as possible to the CAN IC, and reduce the load on the Arduino microcontroller. CAN more...
by Jan Cumps
in
Arduino on Jun 18, 2019
“I'm trying out CAN communication with the Arduino MKR CAN Shield. I have a CAN bus test setup in the lab, with two DIY CAN drivers. If all is OK, I should be able to write firmware and plug more...
RCWL-0915 Analog Readings
FreeRTOS running on a Arduino UNO
Rose lighting effect
Display analog output of RCWL-0516 on oscilloscope
Vehicle Fan Controller
Arduino SD Card & LM386 Audio Dev board - Project14
Arduino in Test Instrumentation - LabVIEW Programmable Switch
Lino 1.0 Prototype in action
Happy B-Day Project14
Happy Birthday Project14 | Element14
A Scanning Laser Distance Sensor
BoingBall animation on Arduino Video Shield VS23S010D
Fruit Ninja (simplified) 80 * 80 project by KIMBAB:)
