Skip navigation

Arduino Tutorials

3 Posts authored by: Christopher Stanton element14 Team
  Previous Guides: Getting to Know Arduino : Part 1 : Hello, World! Getting to Know Arduino : Part 2 : Hello, Again!   So after getting a little familiar with flashing an LED in Getting to Know Arduino : Part 1 : Hello, World! and Getting to Know Arduino : Part 2 : Hello, Again! of my Getting to Know Arduino, I have decided to throw a bit of a curve ball with my Part 3. So assuming that you already have picked up a Breadboard and some wires with your Arduino Uno. I decided that som ...
  Next Guide: Getting to Know Arduino : Part 3 : Taking your Temperature   Previous Guide: Getting to Know Arduino : Part 1 : Hello, World!   In part 1 of my Getting to Know Arduino, I blogged about flashing an LED (light emitting diode) with the Arduino Uno and how to get started with it using an A to B USB cable. However, we only flashed the LED that was on the circuit board of the Arduino and we didn't actually get to building any circuitry with it, but in the blog post w ...
  Next Guides: Getting to Know Arduino : Part 2 : Hello, Again! Getting to Know Arduino : Part 3 : Taking your Temperature   I recorded a video to introduce the Arduino Uno and how to get started with it. The premise was that you didn't need to add anything extra, except for an A to B USB cable (always check the type you need for the Arduino you have) because although you can connect an external power supply it can be powered purely from the USB, and you could get code running with ...