Skip navigation
This is a continuation of the blog post I posted earlier this week Arduino MKR WiFi 1010 + MKR ENV Shield , as part of this blog post I using am using Arduino MKR 1010 (a MRK family of boards that has WiFi and Bluetooth), MKR Environment Shield to post sensor values to Arduino IoT cloud, and an I2C OLED to display sensor values and to show data posted on the Arduino IoT cloud.   I have always wanted to try Arduino IoT cloud and finally thought that I should give it a try , ...
I am road testing https://www.element14.com/community/roadTests/2184/l/Arduino-MKR-WAN-1300-+-ENV-Sensor-Shield , as part of this blog post I am going over the MKR Environmental Sensor Shield. For this I am using Arduino MKR 1010 which I had in my parts bin (a MRK family of boards that has WiFi and Bluetooth).     The MKR ENV Shield allows a MKR board to acquire environmental data collected by an array of sensors. These sensors are of the latest generation and measure atmospheric pre ...
This is a countdown clock made with the Adafruit Pro Trinket 5V 16MHz, Adafruit DS3231 Precision RTC Breakout, and 2x Adafruit 0.56" 4-Digit 7-Segment Display w/I2C Backpack - Blue. Schematic created by Adafruit   The clock is set to countdown to November 2, 2020 at 12AM. This is the beginning of a three day period in which there is a 1 in 240 chance that Near Earth Object 2018 VP1 could potentially impact the Earth. https//cneos.jpl.nasa.gov/sentry/details.html#?des=2018%20VP1  ...

Filter Blog

By date: By tag: