Skip navigation

Arduino

3 Posts authored by: carmelito
I am road testing https://www.element14.com/community/roadTests/2184/l/Arduino-MKR-WAN-1300-+-ENV-Sensor-Shield ,  and this is simple point to point communication test using two Arduino MKR 1300.  As part of the test I am using an Arduino MKR Environment shield on one of the MKR 1300  boards and other board is connected to an OLED display to show the Temperature, Humidity , Illuminance, and UVIndex. In addition as you see in the picture below, I am also keeping track of the packet ...
This is a continuation of the blog post I posted earlier this week Arduino MKR WiFi 1010 + MKR ENV Shield , as part of this blog post I using am using Arduino MKR 1010 (a MRK family of boards that has WiFi and Bluetooth), MKR Environment Shield to post sensor values to Arduino IoT cloud, and an I2C OLED to display sensor values and to show data posted on the Arduino IoT cloud.   I have always wanted to try Arduino IoT cloud and finally thought that I should give it a try , ...
I am road testing https://www.element14.com/community/roadTests/2184/l/Arduino-MKR-WAN-1300-+-ENV-Sensor-Shield , as part of this blog post I am going over the MKR Environmental Sensor Shield. For this I am using Arduino MKR 1010 which I had in my parts bin (a MRK family of boards that has WiFi and Bluetooth).     The MKR ENV Shield allows a MKR board to acquire environmental data collected by an array of sensors. These sensors are of the latest generation and measure atmospheric pre ...

Filter Blog

By date: By tag: