• Arduino mega based Snake game

    Open video

    Profile Photo
    last modified by nishanchettri
  • Arduino MKR CAN Shield Review - part 2: Interrupt and Filter

    A follow up project with the Arduino MKR CAN Shield. In this post, I try to offload as much effort as possible to the CAN IC, and reduce the load on the Arduino microcontroller.   CAN Receive with Interrupts&...
    Profile Photo
    last modified by Jan Cumps
  • Arduino MKR CAN Shield Review - part 1: Log BUS Traffic

    I'm trying out CAN communication with the Arduino MKR CAN Shield.   I have a CAN bus test setup in the lab, with two DIY CAN drivers. If all is OK, I should be able to write firmware and plug the Arduino CAN sh...
    Profile Photo
    last modified by Jan Cumps
  • I can't sample analog input signal to ardiuno uno for higher frequency . I am unable to read analog input signal with delay less than 4 milliseconds.

    I am working on a project to read the analog signal from the input port of Arduino and print it to serial monitor i am unable to read the input signal with delay less than 4 ms, it works with delay higher than 4 ms .
    Profile Photo
    last modified by rajivkr
  • Digital volume control

    Hello every one I have a project I would like to try at work. We have an old radio at one bench and speakers running to every other bench. The volume is a pain to change. I thought what if I built an app that every on...
    Profile Photo
    last modified by ctucht16
  • Part 3.3: Arduino Uno + ESP8266 + Eclipse Ponte HTTP Bridge = MQTT Magic

    In my last two posts i covered how i setup the Eclipse Ponte Bridge locally and how my Arduino Yun with an Infineon Shield was reading from a MQTT topic from it using HTTPClient   In this post i will cover how i...
    Profile Photo
    last modified by Mohan Palanisamy
  • mipi dsi on arduino?

    what is the best way to connect an arduino to a mipi dsi screen like this one: https://www.alibaba.com/product-detail/1-2-inch-390-390-qhd_60814031531.html?spm=a2700.7724838.2017115.1.3a2a624eRDLpMO&… ca...
    Profile Photo
    last modified by haimbilia
  • SIM800L Connection issue.

    Hi,     I'm working with Arduino and SIM800L. With the help of this forum, I successfully connected my SIM800L to the network and could do communication with the server. However, I'm facing a tedious issue....
    Profile Photo
    created by aditya_ponkshe
  • Sensor to detect Human Presence

    Hello Friends,                       Is there any sensor to detect human presence . Am aware of PIR (Passive Infra R...
    Profile Photo
    last modified by gunaseelan
  • Bilingual Arduino Vlog for Products

    Hi guys,   Im migrating my blog from wp to YouTube in order to present final projects created for a specific need and to encourage the production of products that the market actually needs.  Here is the lin...
    Profile Photo
    last modified by quique123
  • State of Arduino by Massimo Banzi at Maker Faire B.A. 2019

    This was posted by Make where Massimo Banzi from Arduino gave a State of Arduino speech at the recent Maker Faire Bay Area 2019.    Some highlights I pulled out of the speech. 30M downloads of the Arduino...
    Profile Photo
    last modified by jomoenginer
  • Arduino-based Smart Watering of Plants

    I found this example really detailed and thorough.   https://www.mathworks.com/help/supportpkg/arduino/examples/arduino-based-smart-watering-of-plants.html   Any thoughts on what other sensors can come i...
    Profile Photo
    last modified by madhugovindarajan
  • State of Arduino: Massimo Banzi at Maker Faire Bay Area 2019

    Open video

    Profile Photo
    created by jomoenginer
  • is arduino reliable for industrial environment for industrial application?

    hi all, i have used arduino uno to make datalogger for industy.i used sd card,rtc,lcd and some basic ic in my circuit.plz do rply.is it reliable to use arduino in industry?
    Profile Photo
    last modified by parth.shah
  • Arduino LED Dimmer , TV Remote Controll,  Saving  EEPROM

    Hallo   Actually I want to make a LED Dimmer with Arduino with Remote Controll. I tried with online help , It was good. But I need some changing in it. Please help me for it.   I want to save last state of...
    Profile Photo
    last modified by arduino007
  • 4-20ma Circuit Review

    Hi everyone I have made this 4-20ma circuit and would like to have a review and get some feedback before I make the pcb.   Here is the reference circuit https://www.analog.com/en/design-center/reference-designs...
    Profile Photo
    last modified by s1buell
  • USB to RS232

    Does anyone here have any experience with this topic?   I`m going from a TUSB2077APTR controller to two FT232RL-REEL IC`s just to test this prototype idea.
    Profile Photo
    last modified by s1buell
  • TinkerCad Tutorial #1 Simple Arduino LED Blink

    TinkerCad Tutorial #1 Simple Arduino LED Blink               Hi. Today, we shall another simulation tool which we can use to simulate our Arduino pro...
    Profile Photo
    last modified by meera_hussien
  • microDrum piezo pad help

    Hi everyone, I am putting together a homemade electronic drums, after a lot of research I found the microDrum project, at first this seemed well produced and with enough functions, as I went deeper I realized that a l...
    Profile Photo
    last modified by chicocybergoth
  • Simple Arduino LED Blink Using Tinkercad

    Open video

    Profile Photo
    created by meera_hussien