Skip navigation

Connected Cloud Challenge

9 Posts authored by: weiwei2
This is the final creation *this is a placeholder that i intend to update further*               Summary I keep having DAPLink error with the board. Please look at my blog #3 on the details another problem is the forever loading situation upon running the debug. this problem is also due to same reason as above. So, i strongly think the documentation and user manual have to include a FAQ section of problem solving     List of Blogs    ...
this explains my exploration with the many and somewhat confusing services on AWS   although i have used some of AWS services in the past, the IoT portion is new to me   After referring to the FreeRTOS getting started guide with PSoC 6, i list down the important components   IoT core Thing   Lambda -> this is used to create function or micro service without configuring the EC2 or ECS instance. A simple EC2 instance with the other stuff will set the user back by at lea ...
DC motor   *this is a placeholder that i intend to update further* ...
how to do IO ?   *this is a placeholder that i intend to update further*       Let's revisit the MQTT step Looking my blog #1 after we successfully run the debug via kitprog3, we will use putty (below is my settings) It will shows this output, where the thread is suspended after we click resume, we will see the output ...
weiwei2

System Diagram - #5

Posted by weiwei2 May 12, 2020
*this is a placeholder that i intend to update further* This is the system diagram   The PSoC 6 board is connected to coin box           I do face this error And here are the details: in fact this is something that i have resolved in my blog #2. But i have forgotten about the solution. i list them down below as reference this happen when i click aws_demos Debug (KitProg3) in the Launches   solution 1) ensure firmware is updated. 2.3.0.568 2) en ...
My daughter assembled and painted this 'stupid' box coin box robot It will be used for our main coin box illustration operation is simple, a dc motor pushes up the mouth when there is electricity passing through due to placement of coin on the hand my next task is to connect the signals to the PSoC 6 board ...
having initial failure with the pioneer kit DAPLink (note: i have subsequently resolved it) for mBED, i have decided to check out the forum on any TFT support under ModusToolbox or emwin to my delight there is a forum post here that adds TFT support in Modustoolbox   first, i try to add the TFT to the project i create in my blog 1 i did encounter a problem when it complains CY_TOOLS_PATHS is not set, and i resolve it by adding environment variable as describe in  https://www.cypress ...
It is the last day for this weekend, and i am rushing to try to able to use Modus toolbox i find there are lots of video tutorial provided by Cypress Semiconductor on both Modus Toolbox [1] and PSoC 101 and there my starting point is.   however, i don't seem to see any example on its LCD support. the nearest is emwin, that can be used in MBED i also look at https://iotexpert.com/2019/12/09/   which does have a displaythread that update to TFT screen i also look at https://www ...
Details about this contest is at Connected Cloud Challenge with Cypress and AWS IoT and it contains useful information and technical resources link. for convenience, i also copy and paste some of these urls at the references section of this blog It is a hot sunny day and under MCO, i find some time to learn about the kit.   Software Installation Modus can be installed from https://www.cypress.com/products/modustoolbox-software-environment It has packaged solution to connect to Arm Pel ...