#Blog7

 

Hello Everyone!

 

Here is my work on the Tiny OLED Display, which is of I2C Interface.

 

Display interface

 

Display: SSD1306

Type : 4 Pin 128X64 OLED Display

Interface : I2C

Resolution : 128 X 64

Display Size : 0.96 inch

 

The Circuit Diagram

circuit The Code

 

#include <Wire.h>
#include <ACROBOTIC_SSD1306.h>


void setup()
{
  Wire.begin();
  oled.init();                      // Initialze SSD1306 OLED display
  oled.clearDisplay();              // Clear screen
}

void loop()
{
   oled.setTextXY(0,0);              // Set cursor position, start of line 0
  oled.putString("ELEMENT14");
  oled.setTextXY(1,0);              // Set cursor position, start of line 1
  oled.putString("Design Contest");
  oled.setTextXY(2,0);              // Set cursor position, start of line 2
  oled.putString("Arduino,");
  oled.setTextXY(2,10);             // Set cursor position, line 2 10th character
  oled.putString("GNPK");
  oled.setTextXY(3,0);   
  oled.putString("Smart Gloves");
}

 

The Application

 

The OLED Display is used to display the message that has been converted from the Gestures. The Flex Sensor is used to capture the gesture. On particular Gesture the corresponding message is synthesized, the message will be conveyed in both text and voice mode.

 

Stay Tuned

Thanks for reading my blog