Skip navigation
I have no idea what happened to part 10.   Does  anyone? ...
The Ultimate Challenge!   I received word that the review of the 803-960 MHz review has been delayed by considerations regarding Public Safety Mobile Broadband (PSMB) provisions. As there is no completion date set for these considerations the ACMA has decided to advance parts of the 803-960 MHz review which do not directly rely on decisions regarding PSMB. The ACMA hopes to release a further discussion paper in the review in the first quarter of 2015 which will involve some decisions on l ...
First of all, sorry for my absence... A small list of excuses: a) been sick, b) been busy with school, c) haven't really got anything worth telling about done, ... ... ... z) lazy. Feel free to pick your favourite What I’ve done during the absenceCircuit DesignI finally got around to making my prize order, should arrive next week It took this long, as most of the stuff is components for my custom home automation add-on for the Pi. It'll include 1-Wire, RTC, 8-ch relay controller, "wat ...
Forget Me Not :  eLDERmon  OpenHAB  This post continues with my Hardware modification to provide a 'status' indication back from RF switched Outlets, amongst other things   Link to other posts Forget Me Not : eLDERmon Intro Forget Me Not :  eLDERmon  Electrical Forget Me Not :  eLDERmon  Outlets Forget Me Not : eLDERmon Planning Forget Me Not : eLDERmon Parts 1 Forget Me Not :  eLDERmon  Sponsor Parts Forget Me Not : eLDERmon Hardware Hacking For ...
Previous Posts: Epidode 1: Forget Me Not: Application Episode 2: Forget Me Not: The Best Laid Plans ... Episode 3: Forget Me Not: Setup EnOcean with openHAB Episode 4: Forget Me Not: Medication System Episode 5A: Forget Me Not: Using Notify My Android with OpenHab Episode 6: Forget Me Not: Plant Watering System Design Episode 7: Forget Me Not: Medication System Demo Episode 8: Forget Me Not: Using Twitter Episode 9: Forget Me Not: Sunshine, Lollipops, and Rainbows Episode 10: Forget Me ...
verrverr

Pas Home / Stepper motor

Posted by verrverr Sep 18, 2014
Pas Home - Index  During the last days I have do some testing and prototype with Stepper motor for opening and closing my curtains. Durant les derniers jours j'ai réaliser quelque test et protype avec les Stepper motor pour l'ouverture et la fermeture de mes rideaux       Beginning / Début  I started by following this tutorial https://learn.adafruit.com/adafruits-raspberry-pi-lesson-10-stepper-motors to control a stepper motor and then I try in rea ...
Pas Home - Index  This week the winter really begins to be felt in Quebec. With an outside temperature of 10 degrees Celsius my heating system must operate efficiently and with high availability. In a previous blog,Pas Home / 1-wire vs Tektronix oscilloscope, I present the problems in my DS18B20+ sensor network. Thanks to the oscilloscope win I could really see the problem and find a good solution. After several days of testing witout error I finally chose the simplest solution, replace t ...