Skip navigation

ita.jpgThe In The Air Challenge is running from September 22nd to final submission date of February 27th (at midnight).

Previous Activity:

Blog Summary #000 : In The Air Challenge 2014

Blog Summary #001 : In The Air Challenge 2014

Blog Summary #002 : In The Air Challenge 2014

Blog Summary #003 : In The Air Challenge 2014

Blog Summary #004 : In The Air Challenge 2014

Blog Summary #005 : In The Air Challenge 2014

Blog Summary #006 : In The Air Challenge 2014

Blog Summary #007 : In The Air Challenge 2014

 

NameSuper Awesome Blog Time
janisalnisIn-the-Air-Challenge: AirSchool Project Summary
dimonicNo Updates
ravi_butani

No Updates

xever

Carbon Footprint Monitoring - Outdoor Sensor Enclosure

Carbon Footprint Monitoring - AirVantage REST Library

Carbon Footprint Monitoring - Calculating Car Emissions

Carbon Footprint Monitoring - Mobile Application

Carbon Footprint Monitoring - Interpreting Collected Data

Carbon Footprint Monitoring - Smart Switch/Plug

Carbon Footprint Monitoring - Summary

amgalbu

AirMobile - 26 - Driving servo on BBB

AirMobile - 27 - Driving a servo on BBB (2)

AirMobile - Data map demo

AirMobile - 28 - Finalizing OpenHAB setup on BBB

AirMobile - 29 - Mounting the sensor

AirMobile - First test video

AirMobile - 30 - Bluetooth issues

AirMobile - 31 - Final demo

AirMobile - 32 - Conclusions

tomaja

In the Air Design Challenge - Pollen & Allergen Sensing - Post 8 (InTheAir application)

In the Air Design Challenge - Pollen & Allergen Sensing - Post 9 (Project Snapshot)

clk

No Updates

rmlab

No Updates

nikil511

[Air ex Machina] #07 Device Managment - OTA update

[Air ex Machina] Interlude

ipv1

[Firecracker Analyzer] Obligatory Guide - Using Sierra Air Vantage with your Device

[Firecracker Analyzer] Creating a Wireless Sensor Node using TI's stuff.

[Firecracker Analyzer] Hot air assembly of TI Solar Harvester

[Firecracker Analyzer] Successful QFN Assembly

[Firecracker Analyzer] Testing the Texas Instruments BQ25504 - Success?

[Firecracker Analyzer] The Energy Harvester

[Firecracker Analyzer] Wireless sensor Node part II & Setting up a solar Fuel Booster Pack

[Firecracker Analyzer] Challenge Summary and Future Work

engsweeDust, Temperature and Humidity Monitor Chapter 12
happy1No Updates
fvan

[AirCare] InTheAir - Week 17: Surface Mount Soldering

[AirCare] InTheAir - Week 18: Finalizing Things

[AirCare] InTheAir - Final Summary

dwinhold

IOT - In the Air Challenge - Portable Field Tester - Not so final report

michaelwylie

In The Air: Episode 8

In The Air: Episode 9: Pump Control

In The Air: Summary Post

ita.jpgThe In The Air Challenge is running from September 22nd to final submission date of February 27th (at midnight).

Previous Activity:

Blog Summary #000 : In The Air Challenge 2014

Blog Summary #001 : In The Air Challenge 2014

Blog Summary #002 : In The Air Challenge 2014

Blog Summary #003 : In The Air Challenge 2014

Blog Summary #004 : In The Air Challenge 2014

Blog Summary #005 : In The Air Challenge 2014

Current Activity:

Blog Summary #007 : In The Air Challenge 2014

Blog Summary #008 : In The Air Challenge 2014 - Final

 

NameSuper Awesome Blog Time
janisalnis

In-the-Air-Challenge: A sheet of laser light for 2D visualization of dust flow

In-the-Air-Challenge: Spending the 500 USD parts budget

In-the-Air-Challenge: Measuring CO2 levels during lectures with EXTECH CO2 monitor

In-the-Air-Challenge: Exploring internally NDIR CO2 monitor

In-the-Air-Challenge: NDIR CO2 meter connected to IoT via TI CC3200 Wi-Fi connectivity board

dimonicNo Updates
ravi_butani

No Updates

xever

BeagleBone + node.js + Visual Studio

Carbon Footprint Monitoring - [kNow] more AirVantage

Carbon Footprint Monitoring - Power Supplies

Carbon Footprint Monitoring - Power Meter CT

amgalbu

AirMobile - 19 - Memory retention

AirMobile - 20 - Bluetooth protocol

Protocol for IoT

AirMobile - 21 - The board

AirMobile - 22 - Heating up the board

AirMobile - 23 - LaunchPad mating

AirMobile - 24 - Bluetooth connection

tomajaIn the Air Design Challenge - Pollen & Allergen Sensing - Post 7 (WE Direkt PCB)
clk

No Updates

rmlab

No Updates

nikil511

[Air ex Machina] #06 Passive components - prototyping

ipv1[Firecracker Analyzer] Testing the HDC1000 on my Own board
engswee

Dust, Temperature and Humidity Monitor Chapter 8

Dust, Temperature and Humidity Monitor Chapter 9

Dust, Temperature and Humidity Monitor Chapter 10

Dust, Temperature and Humidity Monitor Chapter 11

happy1No Updates
fvan

[AirCare] InTheAir - Week 11: CC3200, Energia and analogRead()

[AirCare] InTheAir - Week 12: Automatically starting some things

[AirCare] InTheAir - Week 13: GP2Y10 BoosterPack

[AirCare] InTheAir - Week 14: Ordering Parts and PCBs

dwinhold

IOT - In the Air Challenge - Portable Field Tester (Note)

michaelwylie

In The Air Update

ita.jpgThe In The Air Challenge is running from September 22nd to February 27th.

Previous Activity:

Blog Summary #000 : In The Air Challenge 2014

Blog Summary #001 : In The Air Challenge 2014

Current Activity:

Blog Summary #003 : In The Air Challenge 2014

Blog Summary #004 : In The Air Challenge 2014

Blog Summary #005 : In The Air Challenge 2014

Blog Summary #006 : In The Air Challenge 2014

Blog Summary #007 : In The Air Challenge 2014

Blog Summary #008 : In The Air Challenge 2014 - Final

 

NameSuper Awesome Blog Time
janisalnisIn-the-Air Challenge:  Texas Instruments MSP 430 FR5969 launchpad
dimonicNo Updates
ravi_butani

In The Air [iot_healthy] #Post 5 : Its too Slow progress...

xever

CC3200 Development in Visual Studio

Carbon Footprint Monitoring - Sensor Nodes

Carbon Footprint Monitoring - Emission Sensor

amgalbu

AirMobile - 6 - Temperature sensor

AirMobile - 7 - Humidity sensor

AirMobile - 8 - NO2 Sensor

AirMobile - 9 - CO sensor

AirMobile - 10 - Switching to "Plan B"

tomajaIn the Air Design Challenge - Pollen & Allergen Sensing – Post 3 (AirVantage Intro)
clk

AirWise #4 - Project Milestones

AirWise #5 - Preliminary Schematic

rmlab

HAB monitoring Post#5 ( BBB to AirVantage using Python with REST API )

nikil511

No Updates

ipv1

[Firecracker Analyzer]Brief update

engswee

Dust, Temperature and Humidity Monitor Chapter 5

happy1

Pollution Effect Minimiser (Post 4)

fvan

[AirCare] InTheAir - Week 5: openHAB and MQTT

dwinhold

IOT - In the Air Design Challenge - Portable Field Tester #3

IOT - In the Air Design Challenge - Portable Field Tester #4

michaelwylie

In The Air: Episode 5 - PCB Design

ita.jpgThe In The Air Challenge is running from September 22nd to February 27th.

Current Activity:

Blog Summary #001 : In The Air Challenge 2014

Blog Summary #002 : In The Air Challenge 2014

Blog Summary #003 : In The Air Challenge 2014

Blog Summary #004 : In The Air Challenge 2014

Blog Summary #005 : In The Air Challenge 2014

Blog Summary #006 : In The Air Challenge 2014

Blog Summary #007 : In The Air Challenge 2014

Blog Summary #008 : In The Air Challenge 2014 - Final

 

NameSuper Awesome Blog Time
janisalnisNo Updates
dimonic

In the Air - Automated Greenhouse First Post

In the Air - Automated Greenhouse Post #2

In the Air challenge - Auto Greenhouse Post #3

ravi_butani

In The Air [IoT_Healthy] #Post 1: Introduction

In The Air [IoT_Healthy] #Post 2: Initial thoughts on CC3200,BBB and Airvantage

Arduino+GPRS or Raspberry-Pi to Airvantage

In The Air [IoT_Healthy] #Post 3: BBB/Pi to Airvantage via MQTT using Paho python client

In_The_Air [iot_healthy] : Table of contents

xever

Carbon Footprint Monitoring System - Introduction

Carbon Footprint Monitoring - Architecture

MSP430 Development in VisualStudio

amgalbu

AirMobile - Description

AirMobile - 1 - Experimenting with Peltier cell

AirMobile - 2- Power management

AirMobile - 3 - Power circuit design

tomaja

In the Air Design Challenge - Pollen & Allergen Sensing

In the Air Design Challenge - Pollen & Allergen Sensing – Post 1 (Pollen Sensor)

clk

Anit-Smog Blog #1

AirWise #2 - Bits and Pieces

AirWise #3 - CC3200 Launch

rmlab

Low Cost Harmful Algal Bloom Monitoring

HAB monitoring Post #2 (Wireless Sensor Node)

HAB monitoring Post#3 (The Base Station)

nikil511

[Air ex Machina] #01 Introduction

[Air ex Machina] #02 LaunchPad cc3200 first play

[Air ex Machina] #03 CC3200 with CCStudio

ipv1

[Firecracker Analyzer] [week 1] System Design and ReDesign

engswee

Dust, Temperature and Humidity Monitor Chapter 1

Dust, Temperature and Humidity Monitor Chapter 2

Dust, Temperature and Humidity Monitor Chapter 3

happy1

Pollution Effect Minimiser(Post 1)

Pollution Effect Minimiser(Post 2)

fvan

[AirCare] InTheAir - Project Description

[AirCare] InTheAir - Week 1: Getting a Launchpad to Blink

[AirCare] InTheAir - Week 2: Preparing the Beaglebone Black

[AirCare] InTheAir - Week 3: Fuel Tank Testing

dwinhold

iot_field_tester (Introduction)

IOT - Portable Field Tester

michaelwylie

In The Air: Epidose 1: Introduction

In The Air: Episode 2 - Preparing for Surface Mount Work

In The Air: Episode 3 - Surface Mount Beginnings