This blog is a continuation of the Konker Connection project. As luck would have it, the accelerometer module did not arrive until one day after the design challenge ended. However that isn't going to stop the project from proceeding. The accelerometers are intended to indicate the tilt angle of the motorcycle and this video demonstrates the accelerometers installed, programmed and functioning in various tilt positions:

 

Project Links:

IoT On Wheels Design Challenge page

 

Links to other blogs on this project are included in the first blog:

https://www.element14.com/community/community/design-challenges/iot-on-wheels/blog/2017/09/21/the-konker-connection-blog-1