Skip navigation
In the preceding posts, we had a quick look at what Zynq-7000 is (Path to Programmable Blog 1 - Getting Started), the workflow (Path to Programmable Blog 2 - Xilinx Tool Flow & Getting Started with Zynq-7000) and we configured a couple of PS peripherals and ran tests (Path to Programmable Blog 3 - PS Peripheral Configuration & TCL). Now comes the important part: making the PL talk to the PS & DRAM, which will be used in probably every design that targets Zynq.   HW Chapter 6 vi ...
Path to Programmable Blog 2 - Xilinx Tool Flow & Getting Started with Zynq-7000 was an introduction to typical Zynq workflow: first configure the hardware (PS & PL) in Vivado, and then export it to Xilinx SDK to work on the software side of things. This blog post covers the next 2 sets of videos & labs: the first set covers PS peripheral configuration & the second one is a quick look at using TCL in Vivado. HW Chapter 4 video: Peripherals, Peripherals & more Peripherals! This ...