Skip navigation
In 2018, we our first Path to Programmable class. I described how the class was conceived by the element14 team, and why we are committed to providing element14 members training on programmable logic devices in a previous blog, Final Words and Future Opportunities on the Path to Programmable: Summary, Projects, Conclusions and Thank Yous. Path to Programmable provide some of our member-engineers who had limited experience designing with programmable devices a training program. The trainees recei ...
Intro: I build this project mainly out of my need to watch videos on multiple devices. I use to see few lectures on my Home Laptop , Some on my Tab and very few on my mobile ,hence i maintain a copy of videos on all these devices and believe me it is a hectic I can run a webserver on my laptop but that would be too much waste of Energy  and this is where I found My Minized Board as the Work & Power Saver . For Implementing a Webserver on minized i need to run Application which handl ...
About a year ago (on an impulse) I began the discussion Re: What's Stopping You Building Your Next Project with an FPGA? (Please, Don't Blame the Cost!)  The discussion was meant to inspire a spirited conversation, that's why I started the discussion with:"The community does a ton of projects with MCUs. If they do the job for you, that's great. But the element14 community is about learning, experimenting and roadtesting. In this spirit, I am proposing that you should try building your next ...
Hey everyone, And just like that we have reached the end of the lab manual series.   Zynq_2017_4_lab_8_v12.pdf   The lab starts off from where we had left off earlier. Just to recap - We now have a bitstream containing our PWM IP We also have attached an ILA to monitor transactions. So now we move onto building our .elf file - on SDK. We have to start by importing one of the codes given in the zip files - LED_Dimmer_Init.c . It's a very straight forward code - and after reading t ...