Skip navigation

Path to Programmable

4 Posts authored by: dotmish
These are notes from the module 1 – chapter 2 Speedway video lecture.   Tools and tool flow.   The Vivado Design Suite WebPACK edition is free and it supports seven Zynq devices.  The free tools include a simulator, device programmer, logic analyzer, serial I/O analyzer, debugger, and design synthesis and integration tools. The typical design flow is to have a system architect responsible for the overall design, with software and hardware developers/designers performing t ...
dotmish

Back After Some Issues

Posted by dotmish Nov 21, 2018
Hi everyone,   Sorry that I've been absent for a while.  Had some significant personal and family health issues.  Then last week Western PA got slammed with a huge ice storm.  A huge amount of trees fell.  We had trees fall on our propane tank, car, and house.  Fortunately damage was minor.  But a lot of work getting everything cut up.   We had no power for 3 days, and no Internet for 5 days.  And even though our Internet connection has been restore ...
dotmish

Module 1 - Lesson 1

Posted by dotmish Oct 8, 2018
P2P – Module 1 – Lesson 1 Notes  Introduction  This is an introductory video that is about 9 minutes in length.  The training is branded as AVNET “Speedway”, and is taught by Josh Foster.  The module 1 objectives are:   Understand how to use Vivado's tools with the Zynq-7000. Learn about the integrated ARM Cortex A9 processor core. Use the Xilinx embedded tools to design and build a system - including both the integration of pre-built IP modul ...
dotmish

Module 1 - Overview

Posted by dotmish Oct 8, 2018
Module one includes a series of video lectures.  Here's the overview:     There are a total of 11 video lectures:   I will be posting my notes for each of the video lectures. ...