Skip navigation

PiCasso Design Challenge

3 Posts authored by: gam3t3ch
So  far I have accumulated about 168.5 hours of 3d printing.  Gone through a few rolls of filament and had multiple failed prints so far just to think there is still more printing to go. I had forgot to scale a few of my prints correctly.  So I have to reprint a few of the parts some are pretty close to scale so I am not going to worry about them until I reprint them in the future to turn them into working parts. The gpio is my main concern getting it perfect on the PiMassive. ...
So each step seems to have its pros and cons today I prepared a video for you on the carving process   So the program I am using for carving is  https://www.vectric.com/products/vcarve-pro   And the CNC I will be using is my MPCNC version 1 which has gotten a ton of revisions in the last 4 years but mine is still going strong so no sense in upgrading it quite yet.   Certainly will be making a newer one for a laser engraver in the future. You can make your own as w ...
I will say this right from the start here.  I had an Idea in my head and ran with it what happens well you will see and so will I as I have never attempted a project of this size or nature so lets get started!   First thing first.   What Is PiMassive?   Short answer is a 20x32 inch Raspberry Pi 3 B+ .  Originally I wanted to do 2ft by 3ft but after considering the sizes of components and the size of my 3d printer even 4 inches bigger would cause me to use more then m ...