Skip navigation
Kit Unboxing  And finally, the kit has arrived and the patience has finally paid off.   The kit came in a securely packed carton.     The items are:   RSL10-SENSE-GEVK Jlink Debugger Debugger Cable NFC antenna CR2032 battery USB cable (missed in the above picture) From the next blog onwards, let's start tinkering with it   Blogs in this series:   Smart Module for Healthcare and Asset Monitoring - Blog #1  [Introduction] Smart Module for He ...
Hardware setup, Final product, and Testing  In the previous blogs Smart Module for Healthcare and Asset Monitoring - Blog #3 and Smart Module for Healthcare and Asset Monitoring - Blog #4, we saw how to set up the main software for the Healthcare wearable and Asset monitoring modules.   The module which we have developed is scalable and can accommodate any use-case scenario. Here I am showing two simple use-cases which are:   Smart monitoring and reporting of healthcare activiti ...
Software setup - Part 2  In the previous blog Smart Module for Healthcare and Asset Monitoring - Blog #3, we have completed our program, we need to flash the same on to the device.   Once the project is finished, it needs to be compiled. Compiling readies the entire project’s source code for deployment. From any tab, click the button in the project options menu on the top-right of the screen. You’ll see a loading message on the screen indicating compiling has started, and ...
Software setup - Part 1  Now it's the time for the software hack!! It's not technically hacking, but rather an approach to make this kit behave as intended by forcefully putting instructions into its mind.     Yes!! We are going to control its mind.   But to control, I need to know how the mind of the RSL10-SENSE module works.   Basically, this is what is inside the module:     It looks a little scary at first. But it's not that scary too.     Bas ...
Hi Folks !!   It's Cris here with a cool project as part of the Think ON Design Challenge with ON Semiconductor. When I came across this awesome contest Think ON Design Challenge, I was so excited to participate. So without a second thought, I accumulated some rough ideas and put together with an aim to build something in a unique and different way. The idea was as follows:   Aim - To design and develop two smart modules (named as 'Smart Band'  and 'Asset Monitor' for illustration ...