to get exclusive member benefits!
I'm finding out about BLE more and more each week. I didn't realize RPi was BLE or Arduino MKR WIFI 1010 was BLE. Updating the firmware on the Arduino MKR WIFI 1010, gave me a new platform to play with the RSL1... MCP23017 c library and main.c is attached below Additional Code included in main.c The Code to initialize the GPIO_SPARE as output at maximum drive strength and onboard button (PB1) as input using SDK ... started wiring on the corresponding machine, and also I'm not sure if my pictures and vid's are available on my other blogs so I put them in this one as well. Ok I finally got it working first test went great, this is the sound that the corresponding machine will pick up and hear. Initial Planning and Block Diagram After received this RSL10-SENSE-GEVK, I plan to connect this RSL10 sense to the IBM Watson IOT platform to send the data of temperature, humidity, accelerometer and gyroscope. Afte... Ok so I received my on semiconductor kit in the mail, and I'm learning to program it right now. There is definitely a learning curve but hopefully I can get it up and running. I'm hoping to make a machine that can hel... Think ON Design Challenge Blog Post #1 It has been months since I sent in my proposal to be part of this design challenge. I was quite excited to be chosen as a challenger. I was waiting to receive the RSL10-... Introduction
Candidate 1 - Training Lab Pro
Candidate 2 - MyTourbook
Candidate 3 - GoldenCheetah
Initial software testing
Importing SportTracks data
Th... I spent many hours this week learning about BLE. I've never used any BLE devices in projects before, so I needed to get up to date. I found some good training videos online. This set of videos from Ellisys is ... I started the first prototype of the Smart Pet Collar. First I had to make a solid model of the actual parts. The blue section is the main PCB and components, The yellow box is the 10-pin J-Link connector. The gr... Introduction
Mounting the device
Introduction This is my first design challenge... So, while I'm waiting for hardware to arrive, I will ponder some of the project objectives and challenges. 1) I'm making a pet collar, so I need a pet collar and a way to attach the board to it. This will requi... After a long wait, I finally received my RSL10-SENSE-GEVK Kit, delivered to me by DHL Express The kit is enclosed in a big box, and inside the box contains a smaller box that has the logo of On-Semiconductor This ... I received my kit last week and decided to do an unboxing video. The board size is extremely small and has a wide array of sensors on it. The Air Quality sensor doesn't work with the out...