• Blog 4 - Think ON Design Challenge - Smart Pet Collar BLEx2

    I'm finding out about BLE more and more each week.  I didn't realize RPi was BLE or Arduino MKR WIFI 1010 was BLE. Updating the firmware on the Arduino MKR WIFI 1010, gave me a new platform to play with the RSL1...
    Profile Photo
    created by rsc
  • MCP23017 (16-Bit I2C GPIO Expander) Interfacing with ON Semiconductor RSL10-SENSE-GEVK

      MCP23017 c library and main.c is attached below Additional Code included in main.c  The Code to initialize the GPIO_SPARE as output at maximum drive strength and onboard button (PB1) as input using SDK ...
    Profile Photo
    last modified by mahmood.hassan
  • Song bird blog #3

    started wiring on the corresponding machine, and also I'm not sure if my pictures and vid's are available on my other blogs so I put them in this one as well.
    Profile Photo
    last modified by steven.hintz
  • Blog#2 songbird

    Ok I finally got it working first test went great, this is the sound that the corresponding machine will pick up and hear.
    Profile Photo
    last modified by steven.hintz
  • Think ON Design Challenge - Automated Self Balancing and Conditions Monitoring Platform

    Initial Planning and Block Diagram After received this RSL10-SENSE-GEVK, I plan to connect this RSL10 sense to the IBM Watson IOT platform to send the data of temperature, humidity, accelerometer and gyroscope. Afte...
    Profile Photo
    last modified by waihong113
  • 1st blog on project songbird

    Ok so I received my on semiconductor kit in the mail, and I'm learning to program it right now. There is definitely a learning curve but hopefully I can get it up and running. I'm hoping to make a machine that can hel...
    Profile Photo
    last modified by steven.hintz
  • Think ON Design Challenge - Family Member Minder - Blog #1

      Think ON Design Challenge Blog Post #1 It has been months since I sent in my proposal to be part of this design challenge. I was quite excited to be chosen as a challenger. I was waiting to receive the RSL10-...
    Profile Photo
    last modified by dwinhold
  • Think ON Design Challenge - Athlete telemetry - Blog #2

    Introduction Requirements analysis Candidate 1 - Training Lab Pro Candidate 2 - MyTourbook Candidate 3 - GoldenCheetah Initial software testing Garmin data Importing SportTracks data Th...
    Profile Photo
    created by stevesmythe
  • Blog 3 - Think ON Design Challenge - Smart Pet Collar BLE

    I spent many hours this week learning about BLE.  I've never used any BLE devices in projects before, so I needed to get up to date. I found some good training videos online. This set of videos from Ellisys is ...
    Profile Photo
    created by rsc
  • Blog 2 - Think ON Design Challenge - Smart Pet Collar 3D Print

    I started the first prototype of the Smart Pet Collar. First I had to make a solid model of the actual parts. The blue section is the main PCB and components, The yellow box is the 10-pin J-Link connector. The gr...
    Profile Photo
    last modified by rsc
  • Think ON Design Challenge - Athlete telemetry - Blog #1

    Introduction My project Design objectives The plan Research Materials Software development Mounting the device Testing Coming next Introduction This is my first design challenge...
    Profile Photo
    created by stevesmythe
  • Blog 1 - Think ON Design Challenge - Smart Pet Collar

    So, while I'm waiting for hardware to arrive, I will ponder some of the project objectives and challenges. 1) I'm making a pet collar, so I need a pet collar and a way to attach the board to it.  This will requi...
    Profile Photo
    last modified by rsc
  • RSL10-SENSE-GEVK Kit Unboxing!

    After a long wait, I finally received my RSL10-SENSE-GEVK Kit, delivered to me by DHL Express The kit is enclosed in a big box, and inside the box contains a smaller box that has the logo of On-Semiconductor This ...
    Profile Photo
    created by waihong113
  • RSL10-SENSE-DB-GEVK Unboxing Video and First Impressions - Blog #1

    I received my kit last week and decided to do an unboxing video.         The board size is extremely small and has a wide array of sensors on it. The Air Quality sensor doesn't work with the out...
    Profile Photo
    last modified by enkrypted