Applies to both the Inforce IFC6410 and IFC6410 Plus


Parts needed:





  1. Heatsink only makes connection with the SoC package but it makes a pretty strong connection from the included sticky/thermal pad
  2. Mix a bit of your quick setting epoxy together
  3. Apply to bottom of 5V fan with a small toothpick or something. I put a bit on the corners and some on the center
  4. Let the fan sit for 15-min. Put a stack of quarters on top of the fan or something to apply pressure.
  5. This is sufficient enough to keep it cool. No need for additional bottom mounted heatsink or chassis mounting.