Skip navigation
merlinuk55

diy sbc

Posted by merlinuk55 Feb 24, 2018
hi all i am not new to eletronics but i am new to microcontrolers and sbc but i was wondering were do i start in building my own sbc i know you need the basics the prosesor ram rom and mic parts ...
I finally purchased a couple of PocketBeagles, I knew they would be small, but it is still amazing to see it close-up! It is very thin too, it measured 4.60mm (the highest point is the surface of the Octavo module). For connections, I purchased 2x9way total 18-way header pins because these are cheaper than 2x18way. A total of four of these are needed to fully connect to the PocketBeagle, although that might not be necessary for all projects. Note that the header pins are connected to the u ...
The Volocopter saw its first tethered passenger flight during CES 2018. (Image credit: Volocopter)   German drone manufacturer Volocopter recently demonstrated its first manned flight at this year’s CES, of course, it was tethered and indoors but it’s still a milestone never the less. With the onset of autonomous vehicles, it was only a matter of time before autonomous drones transitioned into pilotless taxis set to enter into service sooner than we might think.   The Vol ...

Filter Blog

By date: By tag: