Skip navigation

GIZMO 2

2 Posts authored by: Brian Welsby Top Member
     This is my design for a 3D printed enclosure, I have used OpenSCAD for this as it's my preferred design tool and just for fun I used the GIZMO2 as my development workstation. To start with I set-up my GIZMO2 with a 120GB SSD and installed Lubuntu, this is Ubuntu but with a lightweight GUI so requires less memory.  I then installed OpenSCAD with a simple   sudo apt-get install openscad If anyone would like the full details for installing Lub ...
If you haven't already read this excellent post  Gizmo 2 – The New Batch  by shabaz  please do.   Here is a very brief post of my initial experiences and observations so far..   I was lucky enough to win a prototype board in a recent element14 competition and as soon as I received the package I connected everything up to my Sony TV HDMI input and ran through all the demos as described in the above blog.   Switching to my Acer LCD monitor which is full HD re ...