Analog Devices is a leading provider of high-performance integrated circuits used in analog and digital signal processing applications.
Use this section to access the latest news and product information from Analog Devices or view the latest discussions in our EngineerZone community.
ADALM1000: Active Learning Module
Ideal for exploring:
- And much more!
In stock - ready to ship same-day!
|What is a Circuits from the Lab Reference Circuit? |
Watch a video about Circuits from the Lab. (1 minute)
Learn more and browse our collection of more than 150 reference circuits.
Part of register setting:
Reg 01h<14> = 1
Reg 1Ah<9:0> = 40h ; Reg 1Ah<11:10> = 1:1 ; Reg 1Ah<13:12> = 1:0; Reg 1Ah<19:14> = 0h ;
Reg 1Bh<3:0> = 2h ;
Accroding to data sheet( if I dont understand anything wrong), the pin 33(LD_SDO) would always output the lock detect signal in this setting.
However, when I have gotten the locked signal through Spectrum Analyzer, the pin 33 still would not output a high level singal. So where is the problem?
I am working on the spice model of ADG721.cir. The mux control input works as if it is low-active sw. But this is against what the datasheet says: logic 0 means sw off. Please confirm that spice model is corrent or not.
Many thanks. jo
referring to datasheet i found adis16475‘s zero bias repeatability which is 0.7°/s . I wanna know if this value is measured before or after compensation.
In the colum, it's said that bias repeatability is measure in the temperature of -40 ~85. but in the tips 2 it's said measure in 105， how can i comprehend this？ TKS
Is there any chip similar to AD5447 (high update rate)but with higher resolution like 16 bits
I hear an LT3753 be used to give 250 W output or more by stacking transformers. Is there an app note or anything for this?
Join the discussion at: