Honeywell SEK002 Testing Back a few months back, Randall posted a discussion looking for folks to test the Honeywell Sensors with the SEK002 Sensor Evaluation Kit For Arduino with the Cypress PSoC BLE Pioneer Kit and I had volunteered to give it a go at the time of the posting. However, due to a number of computer issues and other life events that I have had to attend to recently, I was not able to work on this until now. The initial post for this was: https://www.element14.com/c ...
Cypress has a new PSoC 6 tool in town and it's called ModusToolbox. ModusToolbox is a development environment for the PSoC which includes the PSoC SDK, ModusToolbox IDE and Cypress Programmer. The PSoC 6 SDK includes the standard Cypress tools such as PSoC PDL API (based on PDL 3.1), Middleware Libraries, Command-Line Tools, fw-loader, PSoC 6 MCU Configurators, CapSense and more. Link to ModusToolbox site: http://www.cypress.com/products/modustoolbox-software-environment I ...
PSoC 6 Project Overview
Top Level PSoC 6 Design.
Smartphone BLE App
Part 2: Introduction This is part 2 of my 2-part blog, showcasing my Honeywell pressure sensing application using a PSoC 6 BLE Pioneer kit. Part 1, which introduces the Honeywell SEK002 sensor shield and the sensors used, can be found by clicking here. The origins of this project started with a post made by Randall Scansy ...
What is the Honeywell SEK002 R3 sensor shield
Looking at some of the compatible sensors
Honeywell HumidIcon™ Digital Humidity/Temperature Sensor (HIH8000 Series)
Honeywell Basic Amplified Board Mount Pressure Sensor (digital ABP Series)
1 The ABPDRRT005PG2A5 Dual Radial Barbed Gage Differential Pressure Sensor
2. The ABPLANT001PG2A5 Single Axial Barbed Gage Pressure Sensor
Setting out my PSoC 6 project ...