Skip navigation
paj

Cara-aduino

Posted by paj May 14, 2020
Introduction Project Steps Parts list Software required Connecting everything up Script plan Loading Libraries The script Enclosure Future Considerations IntroductionThis is a project I have been planning for a while. I want to know if my caravan is moving (when it shouldn't be!) and also to know where it is any time. I purchased an mkr gsm1400 some time ago and all I have done so far is check it worked by loading the blink script. So I thought it was time ...
NanoRama Enter Your Project for a chance to win a Nano Grand Prize bundle for the most innovative use of Arduino plus a $400 shopping cart! Submit an EntrySubmit an Entry  Back to homepage Project14 Home Monthly Themes Monthly Theme Poll   This has been a fun and crazy ride.  Unfortunately time is ticking away faster than progress is being made on this project.  So, I thought that I should wrap this one up.   Here are a list of the previous posts: DMX diagnostic too ...
For this auspicious Arduino Day celebration, I dedicate the services of the Arduino to the doctors who are treating Covid-19 patients. IDEA The coronavirus pandemic has brought the world to its knees. The only reason is the highly contagious nature of the virus. Healthcare systems worldwide are not competent enough to deal with this due to several reasons like- - Lack of equipment - Lack of doctors - Lack of protective equipment Our last line of defence - the doctors, put in every effort ...
Introduction Thanks Element14 and Tariq Ahmad for sending out Nano BLE Sense Board and a bunch of cool stickers.   In this project build, I have tried to add a PT(PushTo) support (utilizing the onboard Sensors of BLESense board) for Celestron Astromaster 130AZ, that I prefer for (Star-gazing) pastime. Moreover, the scope... interfaces with Stellarium(OpenSource Planetarium Software) that renders realistic projection of the night-sky in real time. Do check out the web-version. This project ...
Here is another version of the Arduino Nano bot that is controlled using an RC controller, basically the pitch and roll on the RC controller is used to move, turn and control the speed of the bot. In the previous version of bot an ultrasonic sensor was used to control the movement of the bot, so that it does not crash into walls, and you can find the info at - Arduino Nano bot - using ultrasonic sensor .   Binding receiver to the transmitter If you bought a transmitter and receiver as o ...
Here is a simple robotics project to undertake with friends or folks at your local maker space. You will need a 3D printer handy to 3D print the STL files attached below, a couple of DC motors with wheels and zip ties to put everything neatly together. And for the electronics, you will need an Arduino Nano, a motor driver , ultrasonic sensor , breadboard and bread boarding wire.  There is enough space between the bottom and top 3D printed part to fit an Raspberry Pi , or Arduino Uno with a ...