Skip navigation
After having had great fun making my TinyDVM for Project 14 I was also very happy to be selected as one of the winners. The Tool Kit that was part of the prize has arrived and below is a video showing my unboxing of all the bits. I do apologise for some poor video shots and some poor lighting but the day was ending and I wanted to get it done. Christmas is coming!     I was particularly impressed with the pliers that are included as part of the Tool Kit, they truly are the biggest p ...
Test Instrumentation Enter Your Electronics & Design Project for a chance to win a Grand Prize for Originality, a Tool Set, and a $100 Shopping Cart! Back to The Project14 homepage Project14 Home Monthly Themes Monthly Theme Poll   The CPU specs are: Pentium® III FC-PGA/PGA2 socket processor-based single board computer (SBC) with 133 MHz system bus 1.26 GHz Pentium III processor with 256 Kbyte advanced  transfer cache or 933 MHz Pentium III processor 512 Mbyte PC-133 SD ...
Test Instrumentation Enter Your Electronics & Design Project for a chance to win a Grand Prize for Originality, a Tool Set, and a $100 Shopping Cart! Back to The Project14 homepage Project14 Home Monthly Themes Monthly Theme Poll   I have been playing around with the soft latch circuit that enables PITS to be turned on / off with a single non-latching switch. I had problems getting the original circuit to work correctly on the breadboard.     A discussion regarding the ...
Test Instrumentation Enter Your Electronics & Design Project for a chance to win a Grand Prize for Originality, a Tool Set, and a $100 Shopping Cart! Back to The Project14 homepage Project14 Home Monthly Themes Monthly Theme Poll   Project PITS has moved forward since the initial prototype was seen to work.   Since deciding that the best place for the on / off switch was between the charger and the boost circuit, the pre-manufactured board could not be utilised. The circuit h ...