Home Automation in the UK Simplified, Part 1: Energenie MiHome Join Shabaz as he works on his IoT home! Learn about home automation using the Raspberry Pi, Energenie MiHome and Node Red. Check out our other Raspberry Pi Projects on the projects homepage Previous Part All Raspberry Pi Projects Next Part Note: This is part 1 of a two-part series. After you've read this, if you're interested to read further, navigate to Home Automation in the UK Simplified, Part 2: Raspberry Pi and Tou ...
Hi, I'm working actually on a professional RS422/RS485 shield for the Raspberry Pi. I wasn't satisfied with the shields on the market. They are very simple and have some disadvantages. My shield comes with the following features: RS422 (full duplex) support RS485 (half duplex) support galvanic isolation between PI and interface indicator leds for RX and TX activity switchable pull-up, pull-down and terminal resistor different modes for send/receive switching (Auto, GPIO, alw ...
Building the structure
Fixing the mirror
Assembling the mirror back side
Keeping the LCD in place
Adding the Raspberry Pi and wiring all together
Raspberry Pi Cooling
Adding the Pi devices
Fixing the back layers firmly
Last touch: positioning the camera
Finished setup and some anticipations
Introduction Having to develop a MagicMirror project almost flexible to fit in different contexts including extr ...