Skip navigation
Hello, i'm here to show you my CRAY Y-MP reproduction i have built over the files of RABBIT ENGINEERING found on thingiverse for Raspberry pi Zero.I have printed the files in 4 days, it tooks so long "sleeping apart". Printed in white pla and painted with the right black and orange acrilics colors. I have installed in it a Raspberry pi Zero W that does his work also over internet installing lynx browser for linux.The most difficult part was print the 16 duplicated parts with my printer without ...
MaaXBoard Monarch Go Pi Hat Getting Started Guides 1. MaaXBoard - Getting Started with the Monarch Go Pi Hat 2. MaaXBoard - Connecting to IoT Connect using the Monarch Go Pi Hat - Coming Soon     Raspberry Pi 4 B Monarch Go Pi Hat Getting Started Guides 1. Raspberry Pi 4 B Getting Started with the Monarch Go Pi Hat 2. Raspberry Pi 4 B - Connecting to IoT Connect using the Monarch Go Pi Hat ...
IntroductionThis blog builds on what Kevin Keryk did with he Monarch Go Starter Kit witht he Ultra96V2. We are going to establish a headless setup, setup a Point to Point Protocol with the Monarch Go Modem, and finally setup a IoTConnect demo over the estabished LTE Connection.   VersionDate Version Revision 17 August 20 01 Initial Release   Required Equipment Monarch Go Pi Hat Raspberry Pi 4 B 16GB MicroSD Card USB Type C Power Supply   Raspberry Pi 4 B Headless Setup and ...
Introduction The Monarch Go Pi HAT is a cellular connectivity add-on card for SBC boards that have a Raspberry Pi HAT-compatible connector. Fitted with Sequans Monarch Go (or Monarch Go GPS) LTE Cat-M1 modem, this HAT board also facilitates expansion via Click boards using a compact onboard Click Shuttle connector. Noteworthy is that an integrated onboard USB-UART bridge interface allows this LTE HAT to also be used with other platforms.   Version Date Version Revision 06 August 20 01 Ini ...

Filter Blog

By date: By tag: