Follow along with Cabe and Jenny as they set up a Raspberry Pi
The Get Started with Pi video series makes it easy for anyone to follow along step-by-step to get started using their Pi.
You'll also need
Running Raspberry Pi Configuration
To get to the configuration tool after your initial install of the operating system, open LXTerminal and type: sudo raspi-config
Set the locale
The format is a two-letter abbreviation for language followed by an underscore “_” followed by a two-letter abbreviation for the country. Always select the UTF-8 option, if one is available. Link to table of location/language values: http://docs.moodle.org/dev/Table_of_locales
IMPORTANT NOTE: The en_GB.UTF-I UTF-8 option will be pre-selected by default (the Pi comes from the UK after all). Be sure to unselect this option (unless you’re in the UK) when you’re selecting your appropriate locale.
Time Zone Selection
Your Pi will not show the current time until you connect it to the internet, even after you select the time zone from the NOOBS configuration menu. The Pi doesn’t have a real-time clock. It will automatically get the time using the Network Time Protocol.
If you don't have an Internet connection then you can use the date command to set the date / time appropriately.
sudo date -s "Jul 5 08:10"