NEW! Pi Desktop
NEW! MATRIX Creator
|The Pi Desktop converts your Raspberry Pi into a desktop computer with WiFi, Bluetooth, Camera, RTC, mSATA SSD interface and a power switch.||The MATRIX Creator features 8 MEMS Microphone Array, FPGA, Temperature Sensor, UV sensor, Pressure Sensor, 3D Accelerometer, Gyroscope, Magnetometer, NFC, ZigBee and Z-Wave.||The Raspberry Pi Sense HAT features an 8x8 RGB LED Matrix, as well as a set of sensors and inputs including: gyroscope, accelerometer, magnetometer, barometer, relative humidity sensor and a small 5 button joy stick.|
|Pi Desktop: Booting from the SSD (aka booting from USB devices on a Pi 3) 5 months ago||by Christopher Stanton|
|The Ultimate Smartphone-Controlled Portable Raspberry Pi 3 Camera - Project Ideas 2 years ago||by spannerspencer|
|New Pi Camera and Pi Camera NoIR V2 2 years ago||by spannerspencer|
NEW! Raspberry Pi Case Black & Grey
Raspberry Pi Sense HAT Enclosure
Raspberry Pi Case
NEW! 32GB NOOBS SD Card
HDMI Audio / Video Cable Assembly 1m, Black
HDMI Audio / Video Cable Assembly 2m, Black
HDMI Audio / Video Cable Assembly 2m, White
HDMI Audio / Video Cable Assembly 1m, White
Stontronics 2.5AMP PSU
16 GB NOOBS SD Card (Transcend)
This is the first in a series we'll post about using BitScope Blade and the obvious place to start is unboxing and assembling it. Blade is a robust industrial deployment solution for Raspberry Pi. more...
Following our post about the Blade weather station in Nepal, this one describes an interactive exhibit created with BitScope Blade Uno, BitScope CAP and a Raspberry Pi 3. The BitScope Blade was used more...
We launched the new BitScope Blade product range exclusively with element14 last week. To help explain how BitScope Blade works and what you can use it for, we'll be publishing a series of posts, of more...
Introduction After a forced pause the Essential Raspberry Pi Peripherals articles series finally restarts with a new proposal. The Pi-Scope lab tool is the first of a series of tools to empower the more...
I love the Pi Screen, there are a few cases out there now but no open source ones that can be laser cut [that I know of], well now you have one. The Case: more...
Introduction In this fourth article of the series Essential Raspberry Pi Peripherals we will see how to install the Pi Camera and the 2.4" Touch Panel on the Raspberry PI 2. In the next article we more...
Introduction Available for the Raspberry PI at the actual date the market offers a number of touch screen displays; the recent launched Raspberry PI 7" LCD touch screen display and the 2.4" HAT more...