- 3 eZ430-T2012 target boards with a 4-pin connector to fit the eZ430-F2013 USB Development Tool
- MSP430F2012-based target board
- Fully accessible pins
- LED indicator
The eZ430-T2012 includes three MSP430F2012-based target boards for the eZ430-F2013 Development Tool. The eZ430 Development Tool provides a real-time debugging and programming interface for the MSP430F2012 on the target board, and comes with the easy-to-use IAR Embedded Workbench Integrated Development Environment (IDE). The T2012 can be used to develop your personal project or to evaluate the MSP430 MCU. The T2012 gives you all the same capabilities and peripherals of the MSP430F2013 on the eZ430, but includes a high-speed, 8-channel 10-bit ADC.
The Texas Instruments MSP430 family of ultra-low-power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 μs.
Key Applications: Wireless audio, Wireless keyboard and mouse, RF enabled remote controls, Consumer electronics, Wireless game controllers.
- Three MSP430F2012-based target boards
- 4-pin connector to fit the eZ430-F2013 USB Development Tool