Version 9
    Buy NowBuy NowDevelopment ToolsTechnical DocumentsVideoFeaturesKit Contents

    OM13028.png

    Kit Overview

     

    LPC1830-Xplorer (OM13028OM13028) is a breakout board for LPC1830LPC1830 Cortex-M3 based microcontroller. The LPC1830LPC1830 microcontroller has flash and flashless parts. For flashless microcontroller has 200KB SRAM, two 32KB SRAM blocks with separate bus. 64KB ROM containing boot code and on-chip software drivers. 32-bit OTP. For flash microcontroller 1MB dual bank flash, 136KB SRAM, Ethernet MAC, one USB 2.0  Device/Host/OTG interface with DMA support, one USB2.0 Host/Device interaface with DMA, on-chip full-speed PHY and ULPI interface to external high-speed PHY, 4 UARTS with DMA support, 2 C_CAN 2.0B, 2 SSPs, 2 I2C, 2 I2S, LCD controller, 8 GPDMA, up to 164 GPIO, 1 10-bit DAC, 2 10-bit ADCs, and RTC.

     

    LPC1830-Xplorer has been developed in partnership with NGX Technologies. It is a compact and versatile evaluation platform for the NXP's Cortex-M3 based MCUs. NGX's evaluation platforms are generally not tied up to any particular debugger or compiler/IDE. However it is not practical to test and ensure that the solution would work out of box with all the available debuggers and compilers/IDE. As long as the compiler supports the particular MCU and the debugger supports the standard debug interfaces like the SWD/JTAG you can use this platform with any tool. The board is supported by extensive sample examples allowing you to focus on the application development.

     

    Key Applications: Industrial, RFID readers, Consumer, e-Metering, White goods,etc.

    More Development Kits and Tools
    Other NXP Development KitsNXP Overview
    Development Platforms & Kitselement14 Knode

     

    Development Tools


     

    Software Development Tools:

     

    Tool TypeSupplierMPNSupported   FamilyDescription
    IDEARMKeil MDK-ARMARM Cortex™-M  / Cortex-R4 / ARM7™ / ARM9™The MDK-ARM is a complete software development environment for Cortex™-M, Cortex-R4, ARM7™ and ARM9™ processor-based devices. MDK-ARM is specifically designed for microcontroller applications, it is easy to learn and use, yet powerful enough for the most demanding embedded applications. Learn More

     

    Hardware Development Tools:

     

     

    Tool   TypeSupplierMPNSupported   FamilyDescription
    Emulator / Debugger / ProgrammerARMULINK2ULINK2ARM Cortex™-M  / ARM7™ / ARM9™ULINK2 Debug Adapter
    Emulator / Debugger / ProgrammerARMULINKProULINKProARM Cortex™-M  / ARM7™ / ARM9™ULINKpro Debug and Trace Unit
    EmulatorSeggerJ-LinkJ-LinkARM Cortex™-M  / Cortex-R4 / ARM7™ / ARM9™JTAG/SWD Emulator with USB interface
    ProgrammerSeggerFlasher ARMFlasher ARMARM Cortex™-M  / Cortex-R4 / ARM7™ / ARM9™Flash Programmer for ARM and Cortex cores

     

    Back to top

     

    Technical Documents


    Learning Center
    TypeDescription
    User GuideNXP: LPC1830-Xplorer Quick Start Guide
    User ManualNXP: LPC18xx ARM Cortex-M3 microcontroller
    User ManualNXP: LPC1830-Xplorer User Manual for KEIL MDK ARM with ULINK2/ME
    User ManualNXP: LPC1830-Xplorer User Manual for LPC-Xpresso with NXP LPC-Link
    Product BriefNXP: Cortex-M microcontroller brochure
    DatasheetNXP: LPC18xx Datasheet
    Revision NoteNXP: Errata sheet 1 - LPC1850, LPC1830, LPC1820, LPC1810
    Revision NoteNXP: Errata sheet 2 - LPC1850, LPC1830, LPC1820, LPC1810

     

    Design Elements
    TypeDescription
    SchematicsNXP: LPC1830-Xplorer Schematics
    Reference DesignNXP: Using the SCT in LPCXpresso, Keil, and IAR

     

    Back to top

     

    Video


     

     

     

    Back to top

    Kit Features


    OM13028-LPC1830+blk.png

     

    • Controller: LPC1830LPC1830, 100 pin BGA
    • PCB: 4-layer (86mm x 40mm, RoHS Compliant)
    • Two LEDs
    • One user switch and one reset switch
    • Boot select switch
    • 32Mb Quad flash
    • On board crystals for controller, RTC and audio codec
    • On board Ethernet PHY, 50 MHz Oscillator and RJ45 connector with magnetics
    • On board audio codec and audio jacks
    • On board USB host power switch
    • On board Micro SD card slot
    • Two USB ports, one HS (High speed) port and one FS (Full Speed) port
    • 10-pin cortex debug header
    • Unused I/Os brought to a header

     

     

     

     

     

     

     

     

    Back to top

    Kit Contents


     

    The NXP OM13028OM13028 is supplied with below contents:

    • LPC1830-Xplorer Evaluation Board
    • 1 meter USB AM to Micro B
    • 0.2 meter USB AF to Micro B

    Back to top