Version 17
    Analog Demo Boards > Audio / Video > Stereo Codec >
    • ADAU7002 Evaluation Board
    • ADAU7002 Evaluation Board


    The EVAL-ADAU7002Z evaluation board provides full access to all inputs and outputs on the ADAU7002. This evaluation board can be powered by a single 3.8 V to 6 V supply or by VDD of the pulse density modulation (PDM) input. The PC board is a 4-layer design, with a single ground plane and a single power plane on the inner layers. The board contains connectors for external microphones and headers for PDM input and I2S output.

    The ADAU7002 converts a stereo PDM bit stream into a PCM output. The source for the PDM data can be two microphones or other PDM sources. The PCM audio data is output on a serial audio interface port in either I2S or TDM format.

    Key Applications: Mobile computing, Portable electronics, Consumer electronics.


    • 64x decimation of a stereo pulse density modulation (PDM) bit stream to pulse code modulation (PCM) audio data
    • Slave I2S or time division multiplexed (TDM) output interface
    • Configurable TDM slots
    • I/O supply operation: 1.62 V to 3.6 V
    • 64x output sample rate PDM clock
    • 64x/128x/192x/256x/384x/512x output sample rate BCLK
    • Automatic BCLK ratio detection
    • Output sample rate: 4 kHz to 96 kHz
    • Automatic PDM CLK drive at 64x the sample rate
    • Automatic power down with BCLK removal
    • 0.67 mA operating current at 48 kHz and 1.8 V IOVDD supply
    • Shutdown current: < 1 μA
    • 8-ball, 1.56 mm x 0.76 mm, 0.4 mm pitch WLCSP
    • Power-on reset

    Ships With

    • ADAU7002 evaluation board (EVAL-ADAU7002Z)
    • EVAL-ADUSB2EBZ (USBi) communications adapter
    • USB cable with Mini-B plug
    • UG-533 user guide

    Blog Posts