Version 16
    Start with the RIoTboard Adapter

     

    Buy NowBuy Now

    The RIoTboard adapter provides an interface between MikroElektronika's Click boards to the RIoTBoardRIoTBoard.

      Bottom-side connection to the RIoTboard's 40-pin EXT connector

      Connector interface for Arduino UNO R3 compatible shield

      Easily add more features like Bluetooth, ADC, temperature and humidity functions via Click boards.

      Two connector interfaces for Pmod (type 2/2A) accessories

      Supports 3.3V and 5V

    Tech Specs

     

    Now Available!  Add on Click Boards

    Bluetooth Click

    BuyBuyMore Info

    Thermo Click

    BuyBuyMore Info

    SHT11 Click

    BuyBuyMore Info

    Analog to Digital (ADC) Click

    BuyBuyMore Info

    BEE Click

    BuyBuyMore Info

    GPS Click L10

    BuyBuyMore Info

    GSM Click

    BuyBuyMore Info

     

    Click boards are plug-and-play modules designed to add extra functionality to existing development kits.  These small, function-specific add-on boards/modules all have a common interface to the mikroBUS™ adapter board.  Multiple Click boards can also be used simultaneously to enable many features to be implemented at the same time.  These Click boards offer a dual power design, 3.3V and 5V, taking the issue of power supply out of the equation.

     

    There are over 70 Click Boards available allowing developers to easily implement features such as Bluetooth, temperature sensing, humidity sensing and analog-to-digital conversion.  Here’s four we’re featuring now – check back for updates as we add more Click Boards to the list!http://www.element14.com/community

     


    Buy NowBuy Now

    Bluetooth Click

      Fully certified Class 1 Bluetooth 2.1 + EDR module

      Bluetooth SIG qualified

      UART (SPP or HCI) and USB (HCI only) data connection hardware interfaces

      Supports Bluetooth data link to iPhone/iPad/iPod Touch

    Tech Specs http://www.element14.com/community


    Buy NowBuy Now

    Thermo Click

      Cold-Junction Compensation

      14-Bit, 0.25°C Resolution

      Simple SPI-Compatible Interface (read-Only)

      Detects Thermocouple Shorts to GND or VCC

    Tech Specs http://www.element14.com/community


    Buy NowBuy Now

    SHT11 Click

      Temperature can be represented in 12-bit or 14-bit format in operating range from -40 to +100°C with accuracy of +/-0.5°C at room temperature

      Humidity can be represented in 8-bit or 12-bit resolution with +/-3% accuracy

      Typical standby, 400nA max

    Tech Specs http://www.element14.com/community


    Buy NowBuy Now

    Analog to Digital (ADC) Click

      12 bit ADC converter (Microchip MCP3204)

      Up to 50k samples per second

      4 input channels

    Tech Specs http://www.element14.com/community


    Buy NowBuy Now

    BEE Click

      2.4GHz IEEE 802.15.4 Transceiver module supports ZigBee™, MiWi™, and MiWi P2P protocols

      FCC (USA), IC (Canade), ETSI (Europe) Certified

      Integrated PCB Antenna with simple four-wire SPI interface to PIC® microcontroller

      Low current consumption (Tx 23mA, Rx 19mA, Sleep 2uA)

      Hardware CSMA-CA Mechanism

      Automatic ACK response

      Hardware security engine (AES-128)

    Learn More http://www.element14.com/community


    Buy NowBuy Now

    GPS Click L10

      210 PRN channels

      66 search channels

      22 simultaneous tracking channels

      -165dBm tracking sensitivity

      Highest autonomous mode acquisition sensitivity, -148dBm

      Low tracking power consumption, 38mA (passive antenna)

      Up to 5Hz update rate

      Embedded with one 4Mbits flash memory

    Learn More http://www.element14.com/community


    Buy NowBuy Now

    GSM Click

      Supports GSM/GPRS protocol stack 3GPP

      Supports GSM/GPRS 850/900/1800/ 1900 MHz Quad-band frequency

      On-board antenna connector

      3.5mm quadrupole earphone/microphone jack

      SIM card socket integrated at the bottom side of the board

      Easy integration with mikroBUS™ form factor

      Supported in all mikroElektronika compilers

    Tech Specs

     

     

    Other Accessories to Extend your RIoTBoard’s Features

     

     


    Buy NowBuy Now

    WiFi Dongle

    Adding WiFi to your board is as simple as plugging in this dongle into a USB port.

      Uses latest 802.11n technology

      Supports data rates up to 150Mbps

      Supports wireless roaming

    Tech Specs


    Buy NowBuy Now

    4.3" LCD Module and Adapter Board

      TFT-LCD Module with 16/24-bit RGB parallel conversion board

      TSC2046 chip for touch functionality

      3.3V regulation chip with I2C control capability and PWM backlight

      Supports 16- and 24-bit driving modes for LCD displays

      4-wire SPI resistive touch screen

    Tech Specs


    Buy NowBuy Now

    9.7" LCD Module

      TFT-LCD Module

      Capacitive Multi-Touchscreen

      1024 x 768 Resolution

      LVDS Signal

      Expands to USB Hub

    Tech Specs


    Buy NowBuy Now

    UART8000-U - A USB to Serial Debugging Cable

    This cable converts from USB to 3-pin TTL allowing for simple and quick debugging of devices compatible with your RIoTBoard.  It is also suitable for serial communications at TTL voltage levels.

    Tech Specs

     

     

    What Software Works with Click Boards?

    µC/Probe ™ Graphical Live Watch™

     

    Micrium’s µC/Probe is a Windows application that allows you to read and write the memory of any embedded target processor during run-time, and map those values to a set of virtual controls and indicators placed on a graphical dashboard.

     

    Absolutely no programming is required – simply drag and drop the graphic components into place, and watch them go.

     

    This software is a must-have runtime agnostic tool to display and control just about any I/O variable in a target system thru rich graphical objects on the host computer. No code on target needed when using JLINK or select JTAG interfaces.  Tech Specs