2.4" HAT Primary Display for the Raspberry Pi

Version 19

    Exclusively available from

    Touch Panel for Your Pi

    Introducing the  4DPI-24-HAT4DPI-24-HAT 2.4 Touch Panel for the Raspberry Pi.

    Buy NowBuy NowQuick Start Guide

     

    I Can See Clearly Now! With the 4D Systems 2.4" Touch Screen for the Raspberry Pi

    Read Article

     

    See other Pi Accessories 

     

      Universal 2.4" Primary Display for the Raspberry Pi.

      Compatible with Raspberry Pi A+, B+, Pi 2 and Raspberry Pi 3.

      240x320 pixel Resolution, RGB 65K true to life colours, TFT Screen with integrated 4-wire Resistive Touch Panel.

      Display full GUI output/primary output, just like a monitor connected to the Raspberry Pi.

      High Speed 46MHz SPI connection to the Raspberry Pi, featuring SPI compression technology.

      Typical frame rate of 17 Frames per second (FPS), higher if image can ba compressed further by the kernel. Lower if no compression is possible.

      Powered directly off the Raspberry Pi, no external power supply is required.

      On/Off or PWM controlled backlight, selectable by on board jumper.

      Module dimensions: 56.5 x 65 x 14.4mm weighing~30g.

      Display Viewing Area: 36.72 x 74.75mm

      4x mounting holes with 2.6mm diameter for mechanical mounting.

      RoHS and CE Compliant.