Version 5

    A Hack Like Heck Project Video

    Vote for this Video by using the Like or Share buttons

    Voting Instructions

    About Hack Like Heck
    Content Partner Program
    All Hack Like Heck Videos

     

     

    The WaveRider is a fully featured Wii Portable, designed to be as comfortable to play as possible. With its never-before-seen software integration and no-expense-spared feature list, it's sure to turn a few heads this year at MGC. Follow ShockSlayer as he takes you on a journey through the advancement of the portablizing community, with the WaveRider as your final destination.

     

     

    Parts:

     

    • 1x OMEGA trimmed Wii motherboard
      • Fully featured, including the MX chip, Wifi module, BlueTooth module, etc.
    • 3x 3.7v 2500mAh Li-ion battery cells
    • 1x 800x480 LCD w/HDMI driver board
    • 1x GCVideo-DVI digital signal to HDMI converter board
    • 1x Prototype BGA-style NAND relocation board
    • 1x Prototype "PowerMii" regulator board
    • 1x Prototype "WiiHUD" audio amplifier
      • Prototype boards have too many individual components to list
    • 1x Power button circuit (D flip-flop w/debouncer)
    • 2x Speakers
    • 1x USB port
    • 4x 3D printed case parts
      • Screen assembly, bezel, back plate, and front extended
    • 1x Hand-made battery cover
    • 1x WaveBird controller
      • Gutted for the case, controller board cutouts, and supporting buttons and trigger assemblies
    • 1x Replacement mini rumble motor
    • 2x GC+ Controller replacement board
      • One of which has custom firmware for controlling RGB LEDs via custom controller protocols
    • 2x RGB LEDs
    • 1x Lasered acrylic cutout for the front logo
    • 1x 5v Sunon blower fan
    • 1x Custom copper heatsink w/soldered copper cutouts
    • 20+ Male/Female Headers of varying amounts of pins
    • 1x 3.5mm headphone jack
    • 1x Charging jack
    • 7x Tact switches
    • 8x Triwing Screws
    • 1x Pig of unknown purpose
    • Plus an incalculable amount of various wire types, kapton tape, thermal paste, paint/gloss, solder, and of course hot glue.