Version 10
    R.O.B. Rebuild and Upgrade

    element14 Presents  |  daftmike's VCP Profile  |  Project Videos

     

    Today on element14 presents Mike gives the classic Nintendo ROB a makeover. He adds a pico projector and servo motors to revamp the 80s gaming icon. We also look at how to add voice control to a project using an open source 'hotword' detector.

     

     

    Product NameManufacturerQuantity
    Buy KitBuy Kit

    DLPDLCR2000EVM -  Evaluation Board, DLP® LightCrafter™ Display 2000, Plug and Play, 8/16/24-Bit RGB Video Interface

    TEXAS INSTRUMENTS1Buy NowBuy Now

    RPI3-MODBP-NOOBS -  Single Board Computer, Raspberry Pi 3 Model B+, BCM2837B0 SoC, IoT, PoE, NOOBS Included

    RASPBERRY-PI1Buy NowBuy Now
    PSG-JMP150FFPSG-JMP150FFJumper Cable Jumper Wires for Gertboard Headers Female to Female Connector 150mm Length PRO SIGNAL3Buy NowBuy Now
    410-233 -  MODLUE, PMOD, AUDIO AMP, 2.5W, CLASS DDIGILENT1Buy NowBuy Now
    ABS-241-RC -  Speaker, 2 W, 8 ohm, 0 kHz to 20 kHzPRO SIGNAL1Buy NowBuy Now
    MC002549 -  3D Printer Filament, 1.75 mm, PLA, Grey, 1 kgMULTICOMP1Buy NowBuy Now
    RPI 8MP CAMERA BOARD -  Daughter Board, Raspberry Pi Camera Board, Version 2, Sony IMX219 8-Megapixel SensorRASPBERRY-PI1Buy NowBuy Now
    2327 -  Raspberry Pi PWM Servo Hat Development BoardADAFRUIT1Buy NowBuy Now
    155 -  STANDARD SERVO TOWERPRO SG5010TOWERPRO SG-5010 85W1249ADAFRUIT2Buy NowBuy Now
    PWI-USB-A71 -  USB 2.0 Sound CardPRUDENT WAY1Buy NowBuy Now
    ABM-714-RCABM-714-RCELECTRET MICROPHONE OMNI PCB PINS PRO SIGNAL1Buy NowBuy Now

     

    Supporting Files

     

    Click Here for access to all the supporting files you will need to replicate this build!