Version 13

    Introduction to 3D Printing: - 4 Part Webinar Series

    Part 1 - Introduction

     

    4 Free Webinars about 3D Printing starting Thursday 22nd of November.

     

    Join e14phil and cstanton Live from the element14 Lab in our 4 Part Webinar Series below exploring your first steps into 3D Printing.

    This series of interactive live webinars will take you from your first print to a designing your own prototypes.

     

    We will also cover:

    • What is 3D Printing
    • Key components of a 3D printer
    • Types of Materials
    • File Sources
    • Heated Bed / Enclosures
    • Physical Support Materials
    • Introduction to software packages
    • 3D Scanning
    • How to take measurements
    • Your first Model

    3D printing for Makers Pt. 1 - Introduction
    • - What is 3D Printing
    • - Key components of a 3D printer
    • - How is 3D Printing different to other manufacturing methods
    • - Types and Brands of Printer
    • - Types of Materials
    • - File Sources

     

    Watch the Video Here

    3D Printing Webinar: Introduction to 3D Printing Recording

    3D printing for Makers Pt. 2 – First Print Basics
    • - Heated Bed / Enclosures
    • - Physical Support Materials
    • - Walk through your First Print Step By Step

    Watch the Video Here:

    3D Printing Webinar: First Print Basics

    3D printing for Makers Pt.3 – Maintenance and Diagnose Bad Prints.
    • - Printer and Filament Maintenance
    • - Diagnosing Faults with prints.

    Watch the Video Here:

    3D Printing Webinar: Maintenance and Diagnosing Bad Prints

    3D printing for Makers  Pt.4 – Create your own functional items
    • - Introduction to software packages
    • - 3D Scanning
    • - How to take measurements
    • - Your first Model

     

    Watch the Video Here:

    3D Printing Webinar: Create your own 3D Models Recording

     

    Our Speakers:

    Phil Hutchinson

    element14 Community
    Maker, Tinkerer.

     

    @LastKnightUK

    Chris Stanton

    element14 Community

    Maker, Guru,

     

    @Stanto