Version 3
    Rasperry Pi4 Resin 3d Experimental Printer

    element14 Presents  |  MAYER MAKES VCP Profile  |  Project Videos



    Tiny resin based 3D printers may be all the rage now, but size matter sometimes, and how these printers operate does not scale up well. Clem has an Idea to circumvent these technical limitations with a ground breaking giant 4k Resin 3D printer! Utilizing 2 Raspberry Pis (4 & 3B+) he sets out to prove that FEP foil can be replaced with a specialized liquid, making the LCD-masking technique viable for large format 3D printers!


    Supplemental Content:


    Bill of Material:


    Product NameManufacturerQuantityBuy KitBuy Kit
    Raspberry pi 4BRaspberry-PI1Buy NowBuy Now
    Raspberry p3B /3B+Raspberry-PI1Buy NowBuy Now
    PRO SIGNAL Audio / Video Cable Assembly, HDMI A Plug to Micro HDMI D Plug, 6.6 ft, 2 m, BlackPRO SIGNAL1Buy NowBuy Now
    CARLO GAVAZZI Solid State Relay, SPST-NO, 25 A, 280 VAC, Panel, Screw, Zero CrossingCARLO GAVAZZI1Buy NowBuy Now
    RASPBERRY-PI Daughter Board, Raspberry Pi 7" Touch Screen Display, 10 Finger Capacitive TouchRASPBERRY-PI1Buy NowBuy Now
    MEAN WELL AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 100.8 W, 36 V, 2.8 AMEAN WELL1Buy NowBuy Now
    MEAN WELL AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 50.4 W, 12 V, 4.2 AMEAN WELL1Buy NowBuy Now
    MULTICOMP Axial Fan, 12 V, DC, 60 mm, 33.05 dBA, 18.84 cu.ft/minMULTICOMP3Buy NowBuy Now
    MEAN WELL AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 15 W, 5 V, 3 AMEAN WELL2Buy NowBuy Now
    TRINAMIC Evaluation Board, TMC2209 SilentStepStick, 2-Phase Motor DriverTRINAMIC1Buy NowBuy Now
    NANOTEC Stepper Motor, High Torque, DC, 0.5 N-m, 1.8 A, Two Phase, 1.75 ohm, 3.3 mHNANOTEC1Buy NowBuy Now
    OMRON Microswitch, Snap Action, Hinge Roller Lever, SPDT, Solder, 5 AOMRON1Buy NowBuy Now


    Additional Parts:


    Product Name

    4k instore Display Monitor 28“

    Aluminium Extrusion for the Frame

    PMMA-XT for the Vat

    PMMA/Acrylic for the Case

    3D printing filament for all the printed parts

    UV LEDs  and heatsinks