Version 2
    Raspberry Pi 4 Experimental Resin 3D Printer Updated!

    element14 Presents  |  MAYER MAKES VCP Profile  |  Project Videos

     

     

    Clem has built a giant resin based 3d printer concept in a previous video, and today it is time to put the concept upside down! The people on the element14 community gave him a lot of advice and ideas to make his idea finally work as it should! Clem builds a second iteration of his 3d printer using daylight resins and easily obtainable parts.  The new Raspberry pi 4 8 GB reduces slicing times and makes for a more responsive GUI on this experimental 3d printer! Now its time for the community to take his findings and iterate  for a bright future of cheap huge 3d printers!

     

    Supplemental Content:

     

     

    Bill of Material:

     

    Product NameManufacturerQuantityBuy KitBuy Kit
    RASPBERRY-PI Single Board Computer, Raspberry Pi 4 Model B, BCM2711 SoC, 4GB DDR4 RAM, USB 3.0, PoE EnabledRaspberry-PI1Buy NowBuy Now
    MULTICOMP PRO 3D Printer Filament, 1.75mm Dia, Blue, TPE, 1 kgMulticomp1Buy NowBuy Now
    PRO SIGNAL Audio / Video Cable Assembly, HDMI A Plug to Micro HDMI D Plug, 6.6 ft, 2 m, BlackPRO SIGNAL1Buy NowBuy Now
    PHOTOCENTRIC 3D Printer Resin, Grey, 1kg, 510cPs Viscosity, 1.16 g/cm³, 6% ElongationPhotocentric1Buy NowBuy Now
    RASPBERRY-PI Daughter Board, Raspberry Pi 7" Touch Screen Display, 10 Finger Capacitive TouchRASPBERRY-PI1Buy NowBuy Now
    MIDAS TFT LCD, 7 ", 1024 x 600 Pixels, WSVGA, Landscape, RGB, 5VMIDAS1Buy NowBuy Now
    MEAN WELL AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 50.4 W, 12 V, 4.2 AMEAN WELL1Buy NowBuy Now
    MULTICOMP Axial Fan, 12 V, DC, 60 mm, 33.05 dBA, 18.84 cu.ft/minMULTICOMP3Buy NowBuy Now
    MEAN WELL AC/DC Enclosed Power Supply (PSU), ITE, 1 Outputs, 15 W, 5 V, 3 AMEAN WELL2Buy NowBuy Now
    TRINAMIC Evaluation Board, TMC2209 SilentStepStick, 2-Phase Motor DriverTRINAMIC1Buy NowBuy Now
    NANOTEC Stepper Motor, High Torque, DC, 0.5 N-m, 1.8 A, Two Phase, 1.75 ohm, 3.3 mHNANOTEC1Buy NowBuy Now
    OMRON Microswitch, Snap Action, Hinge Roller Lever, SPDT, Solder, 5 AOMRON1Buy NowBuy Now

     

    Additional Parts:

     

    Product Name

    Aluminium Extrusion for the Frame

    PMMA-XT for the Vat

    PMMA/Acrylic for the Case

    MAYER MOVES DEVKIT available at Aisler.net on demand