Join us in collaboration with Arduino to Design For A Cause.
Ready? Then Apply Here
5 Blogs each
1 Cause close to their hearts
In 2019 we ran the ‘Design for a Cause' Challenge with Arduino, creating assistive technologies for people living with physical or mental impairments. Community members help their local causes by building projects ranging from the Smart Cane for the visually impaired to a fully functional Smart Trike for a loved one.
The element14 Community is pleased to introduce the next Design For a Cause 2021 Challenge, where thanks to Arduino 50 sponsored Challengers will receive the Arduino Nano 33 IoT for free.
Once again, Arduino is challenging Community members to design the most creative, and altruistic solution for times of duress and global disasters. You can build a project to combat global droughts, flooding, world hunger, micro plastics, issues with long term COVID-19 Symptoms, or aid others with their day-to-day struggles.
For a chance to win one of the prizes below, you must blog your build process and the final outcome of your projects within the Design for a Cause 2021 Challenge space using the Arduino Nano 33 IoT.
What Can I Build?
You can build anything you want, as long as it helps a "Cause" close to your heart, uses the Arduino Nano 33 IoT, and make your code and designs Public after you are done.
Example applications could include:
- Micro Plastic Monitoring Buoy
- Open Source Security System
- Cheap Replacement System
- Cheap Mobile Refrigerator for Vaccine distribution
- Pest control system
- Aids for those with Long COVID-19 symptoms
- Safer cooking options for people with sight impairments
- Mobility Aids
- Open Source Electric Wheelchair Conversion kit
Be Rewarded on the Community
For entering and taking part in the Design Challenge competition, you'll be rewarded the following badges:
Need help? Comment and read the resources below:
Eagle Files (ZIP)
Micro Controller Datasheet
|Applications Open||18th December 2020|
1st Feb 2021
8th Feb 2021
19th April 2021
3rd May 2021
*Or local equivalent
Technical Judge Team
|element14 Community Judges|
element14 Community Team
Selected official applicants will be chosen to receive the "Kit" listed above. These successful applicants will be our sponsored challengers, and they must use the Arduio Nano IoT 33 within their project, and Publish their final Code and Designs on the element14 Community for others to use. Those not chosen as sponsored challengers may also join the competition, but they must base their projects around the kit listed above and adhere to all terms and conditions of the challenge.
They need to post their progress and final project as at least 5 blog posts before the closing date when projects are due. Posts which are media rich with photos, videos, and code samples will be viewed more favorably in the judging process.
Please read the full terms and conditions of the challenge, attached below.
Ready to join the challenge? Then Apply Here
If you are not successful in becoming a sponsored challenger but still want to enter, all you need to do is use the Kit as described above in your project and adhere to the same Terms and Conditions for a chance to be our winner! Non sponsored challengers are eligible for the Finisher and Winner Prizes as well.