Skip navigation
> Events

How To Use MATLAB and Simulink With ThingSpeak.

Event has ended

Loading...

Description

new-mathworks_logo.jpg

Learn more about MATLAB and Simulink

 


{tabbedtable} Tab Label

Webinar
About this Webinar

This webinar will show how you can use MATLAB and Simulink with ThingSpeak, an Internet of Things data collection platform. ThingSpeak can be used to collect, analyze and act on data sent from devices such as Raspberry Pis and Arduinos. To illustrate this, a car counter is implemented overlooking a busy highway using a Raspberry Pi 2 and a webcam.  In this demonstration, Simulink is used to deploy the car-counting algorithm on the Raspberry Pi which is connected to ThingSpeak. The traffic can be analyzed offline with MATLAB or online using ThingSpeak and its built-in MATLAB Analysis and MATLAB Visualizations apps.

 

For those who are new to MATLAB and Simulink, we will cover a short overview and introduction before the ThingSpeak demonstration.


 

{gallery} IoT

92153_wm_logo.png

ThingSpeak

MathWorksCam.jpg

MathWorks Cam


About the Presenter

Eric Wetjen has been working in Product Marketing at MathWorks for the last 7 years. He focuses on bringing MATLAB analysis capabilities to low cost hardware, Test and Measurement equipment and Internet of Things devices.  Prior to MathWorks, Eric held various positions in Product Management and Application Engineering primarily in the telecom industry.  Eric holds a Ph.D. in Engineering from Brown University.

 

 

Wetjen_E-5.jpg



Webinar Recording

When and Where

  • Start Time:

    Nov 12, 2015 9:00 AM CDT (America/Chicago)
  • End Time:

    Nov 12, 2015 10:00 AM CDT (America/Chicago)
  • Location:

    WebEx

Event Info

  • Event Type:

    Webinar
  • Event Visibility & Attendance Policy:

    Open

Contact Info

Comments

Related Content