Skip navigation
> Events

NEW! Introductory Guide to the LightCrafter™ Display Evaluation Module (for ultra-mobile displays)

Event has ended

Loading...

Description

Sign Up for the RoadTest: TI DLP LightCrafter Display 2000 Evaluation Module

 

 

 

 

{tabbedtable} Tab LabelTab Content
About

Introductory Guide to the 0.2 nHD LightCrafter™ Display Evaluation Module (EVM)

Learn from a TI expert how the DLP® LightCrafter Display 2000 EVM can be used for developing a wide array of ultra-mobile and ultra-portable display applications for consumer, wearable and IoT devices.

 

In this webinar, we will review how to use the 0.2 nHD EVM in combination with the BeagleBone Black to enable development of low-cost embedded systems featuring pico projection.

 

DLP LightCrafter Display 2000 Evaluation Module

The DLP® LightCrafter Display 2000 EVM plugs into the BeagleBone Black

 

The evaluation module (EVM) features the DLP2000 chipset comprised of the DLP2000 .2 nHD DMD, DLPC2607 display controller and DLPA1000 PMIC/LED driver. This EVM comes equipped with a production ready optical engine and processor interface supporting 8/16/24-bit RGB parallel video interface in a small-form factor.

 

Key product/tool links:

Key documentation:

Video links:

Presenter

Philippe Dollo

DLP Pico Applications Engineer with a Master’s in IC and Embedded Systems Design from University of Texas at Austin.

Webinar Recording

Click Here To Watch the Webinar Recording

When and Where

  • Start Time:

    Nov 14, 2017 9:00 AM CST (America/Chicago)
  • End Time:

    Nov 14, 2017 10:00 AM CST (America/Chicago)
  • Location:

    webex

Event Info

  • Event Type:

    Webinar
  • Event Visibility & Attendance Policy:

    Open

Contact Info

Comments

Related Content