Event has ended
Description
Introduction to 3D Printing: - 4 Part Webinar Series
Part 3 - Maintenance and Diagnosing Bad Prints
4 Free Webinars about 3D Printing starting Thursday 22nd of November.
Join e14phil and cstanton Live from the element14 Lab in our 4 Part Webinar Series below exploring your first steps into 3D Printing.
This series of interactive live webinars will take you from your first print to a designing your own prototypes.
Watch the recording of this webinar here:
We will also cover:
- What is 3D Printing
- Key components of a 3D printer
- Types of Materials
- File Sources
- Heated Bed / Enclosures
- Physical Support Materials
- Introduction to software packages
- 3D Scanning
- How to take measurements
- Your first Model
Our Speakers:
element14 Community
@LastKnightUK |
element14 Community Maker, Guru,
@Stanto |
3D printing for Makers Pt. 1 - Introduction
|
Watch the Recording Here:
|
3D printing for Makers Pt. 2 – First Print Basics
|
Watch the Recording Here: |
3D printing for Makers Pt.3 – Maintenance and Diagnose Bad Prints.
|
Watch the Recording Here: |
3D printing for Makers Pt.4 – Create your own functional items
|
Watch the Recording Here: |
When and Where
-
Start Time:
Dec 6, 2018 1:00 PM CDT (America/Chicago) -
End Time:
Dec 6, 2018 2:00 PM CDT (America/Chicago) -
Location:
Online Webinar - Sign Up for Email Link.
Event Info
-
Event Type:
Webinar -
Event Visibility & Attendance Policy:
Open
Contact Info
-
-
e14phil
(Owner)
-
Comments