Skip navigation

3D Printing

December 29, 2014
DAB

DAB PrintBot Jr. Update.

Posted by DAB Top Member Dec 29, 2014
Hi All,   I finally got a good print yesterday. It turns out that Slicer will over ride you printer settings unless you explicitly tell it not to. I also reduced the verticle slice size and increased the extruder temperature.   I also set up the printer for 80% fill for the open areas and this gave the final print the solidity I was looking for.   Now I can start the process of looking at designs to try for the neck brace.   More later.   DAB ...

Filter Blog

By date: By tag: