So my Cel Robox is a little sick and I designed some stuff that I wanted to try out. I am working on a robot project and for that I designed the following RPi Case.

case1.png

As you can see there are slots and a potrusion. There are studs for the RPi to fit and I took a model from Thingverse for reference. The Slots fit a servo motor stand as...

servo1.png

The above will fit the servo motor which can have RPi cam or a ranger sensor or both...

3d1.png

My Robot head looks like...

IMG_9591.jpg

and...

A8aV5arXfPcgAz6Wiox1eM-9T2D-aQUi7QwBwwoDAc0=w1185-h889-no

 

Until Cel figures out what is wrong(which I feel is gonna be a while since they have stopped replying to my emails) I feel I am high and dry. In the mean while, I urge you guys to print these out as I have attached the files below. The SKP files as always are available on my github if you need em.

 

Cheers,

IP