Skip navigation

Embedded

3 Posts authored by: Navadeep Ganesh U
Taiyo Yuden BLE EVK : Toggling GPIOs and Taiyo Yuden BLE EVK : Wireless LED Control gives insights on basic configuration, setting up, toggling GPIOs and wireless LED control by interacting with MPU core + SoftDevice of Taiyo Yuden Bluetooth® Low Energy EYSNSNZWW Evaluation Kit . This blog will be all about building a 1miniaturised home automation system using BLE with UART communication with Arduino Nano. For this, I downloaded the following software tools   Segger Embedded Studio V5 ...
Taiyo Yuden BLE EVK : Toggling GPIOs , explains and gives insights on basic configuration, setting up and toggling GPIOs by interacting with MPU core of Taiyo Yuden Bluetooth® Low Energy EYSNSNZWW Evaluation Kit . This blog will be all about configuring, setting up and wirelessly controlling LED over BLE. For this, I downloaded the following software tools.   Segger Embedded Studio V5.10. Nordic Semi nRF52 SDK with Soft Device 12,13. nRF Toolbox Android Application nRF Blinky Andro ...
Recently, I was selected for Taiyo Yuden Bluetooth® LE EVK  RoadTest which is my first experience! Beginning with big thanks to E14, Taiyo Yuden and all supporters.   From past few hours I have been on Taiyo Yuden Bluetooth® LE EVK with fresh hands and came across a lot of troubleshooting steps and debugs. With memory being fresh, I am putting up a day by day update and finally a RoadTest review based on full insights.   This blog will be full of basic getting started ...

Filter Blog

By date: By tag: