RP-2ADP

RP-2ADP-F_02.jpgRP-2ADP-F_01.jpg

 

 

The RP-2ADP is an adaptor for infield wiring of the DB9 Serial connector.

Allow easy access to the TX, RX, and Ground pins.

The RTS and DTR pins (Pins 4 and 7) are also available for CAN bus or port powered devices.

 

* Available in male or female configuration.

* Tab for wire strain relief.

* Mounting Hardware included.

* Accepts 24 - 16 awg size wire.

* Push button Spring-Cage Terminal block make easy secure wire connections.

 

Available at Phoenix Engineering.