Skip navigation
This post documents an enclosure for the milliohm meter described here and is a tale of how the mechanical bits are often as difficult to get right as the electronics.  The meter parts have been stored away, and thus it was not really available due to the lack of an enclosure.  Today I finally got around to putting it all together.   Here it is all wired up but outside of the enclosure: I am not that pleased with the wiring - too easy to bump loose and not that tidy - but easy ...
Introduction For open source projects, I usually create a table containing the parts details or bill of materials (BoM), but it is tiresome to then re-enter all that information into the Farnell or Newark website, to order the bits.   The March 2019 update to the element14 website contains the ability to paste BoM content and it will auto-convert into a nice table with hyperlinked buttons to go directly to the Farnell/Newark product page for each component, or a single-button to purchase a ...

Filter Blog

By date: By tag: